Notes

•In preread editing, if an input video signal is used as the reference signal for the output video signal, this forms a feedback loop. To prevent the occurrence of feedback, set the OUTREF in function menu page 4 to REF, and set item 309 in the extended setup menu to AUTO 1 so as to use an external reference signal.

•When the preread mode is selected, to prevent feedback due to the loop connection, whatever the editing mode of this unit, no E-E video output is available.

When the PREREAD is set to OFF after preread editing, however, if the loop connection remains and an E-E signal is output, feedback will occur.

To prevent this, select PB mode for the video and digital audio channels in all the modes before the preread editing, as follows.

1Set PB/EE in function menu HOME page to PB.

2Set the PREREAD in function menu page 4 to ON.

3Make the necessary connections for the preread editing.

4After selecting the desired insert editing mode, carry out the preread editing.

5When the preread editing is completed, remove the connections.

6Set the PREREAD to OFF.

7Check that no loop connection remains.

Editing 5 Chapter

Chapter 5 Editing 5-15