11-2 Function Menu Item List
The function menu has the following items.
HOME page
Item | Setting |
|
|
F1 (VID.IN) | Selects the input video signal. |
| COMPST: Analog composite signal |
| |
| SDI: SDI signal |
| SG (normally not displayed): Test signal from the internal test signal generator (For details, see setup |
| menu item 710 on page |
|
|
F2 (PB/EE) | Selects the video and audio signals output during fast forward, rewind, stop, and standby. |
| PB: Playback signals |
| EE: |
|
|
F3 (CONFI) | Selects whether or not to use the CONFI playback function when recording. |
| ENABLE: Use the CONFI playback function. (The CONFI indicator lights in the time data display.) |
| DISABL: Do not use the CONFI playback function. |
|
|
F4 (CTL/TC) | Selects the time data to display in time data display area 1 (see page |
| TC: Playback time code read by the internal time code reader, or recording time code. The LTC or VITC |
| time data type indicator (see page |
| UB: User bits data of playback time code or recording time code. The LUB or VIUB time data type |
| indicator lights, depending on whether the time code is LTC or VITC.a) |
| CTL: The running time of the tape being played back or recorded, as calculated from a count of CTL |
| signals recorded on the tape. The time is displayed in Hours: Minutes: Seconds: Frames format. |
|
|
F5 (MENU) | Puts the system into setup menu mode (see Chapter 12). |
| When the current setup menu settings are the same as the contents of any of menu banks 1 to 4, or the |
| factory defaults, the corresponding indication (1), (2), (3), or (dflt) appears. |
| (1): Same as menu bank 1. |
| (2): Same as menu bank 2. |
| (3): Same as menu bank 3. |
| (4): Same as menu bank 4. |
| (dflt): Same as factory defaults. |
|
|
F6 (TCGSET) | • When F4 (CTL/TC) is set to TC, a screen appears that allows you to set the initial value of the time code |
| generated by the internal time code generator (see page |
| • When F4 (CTL/TC) is set to UB, a screen appears that allows you to set the time code user bits (see |
| page |
|
|
a)The selection of LTC or VITC depends on the setting of F6 (TCR) in function menu page 1.
Menu Function 11 Chapter
Chapter 11 Function Menu