Menu items in the range 700 to 799, relating to video control (Continued)
Item number | Item name | Settings | ||||
|
|
|
|
|
|
|
726 | H BLANKING WIDTH | Select the horizontal blanking width of the video output signal. | ||||
|
| NAROW | : Digital blanking (narrow) | |||
|
| WIDE: Analog blanking (wide) | ||||
|
| When WIDE is selected, the horizontal blanking width complies with RS170A, and | ||||
|
| normally the blanking is widened and the image becomes narrower. It is | ||||
|
| recommended to select NAROW at the editing stage, then later, for broadcast | ||||
|
| transmission to select WIDE, to output a signal conforming to the standard. Note, | ||||
|
| however, that NAROW has to be always selected for SDI signals. | ||||
|
|
|
|
|
|
|
727 | VIDEO EDIT PREVIEW | Set the output phase for the video playback signal when any of the ASSEMBLE, | ||||
| SWITCHER | VIDEO, AUDIO CH1 to CH4, CUE, and TC buttons is lit. | ||||
|
| INT | : The video playback signal output phase is the same as the output phase in | |||
|
| |||||
|
| previewing while watching the VTR output signal. | ||||
|
| EXT: The video playback signal output phase is the same as the phase of an | ||||
|
| input video signal or external reference signal. | ||||
|
|
|
|
|
| |
|
| Note | ||||
|
| Whichever setting is used, the correct editing results will be obtained. When, | ||||
|
| however, you are using an external switcher to switch the video output signal | ||||
|
| from this unit for the purposes of preview, select EXT. This will prevent any | ||||
|
| image shifts at editing IN and OUT points. | ||||
|
|
|
|
|
|
|
728 | OUTPUT SCH PHASE | Set the subcarrier H phase. | ||||
|
| |||||
|
|
|
|
|
|
|
733 | C.PHASE TYPE | Select the PAL chroma phase type. | ||||
|
| HUE | : Vary the hue. | |||
|
| L.ALT: Vary the SC phase of composite output. | ||||
|
|
|
|
|
|
|
Menus Setup 12 Chapter
Chapter 12 Setup Menus