Inspection and Maintenance 14 Chapter
This unit is equipped with a
If an error message appears, contact your Sony service representative.
Indications in the time data display
If a problem is detected, the ALARM indicator in the lower control panel lights, and an error message and error code appear in time data display area 1.
Z
ALARM indicator
Time data display area 1
Indications on the monitor
The error message and code also appear superimposed on a monitor connected to the COMPOSITE VIDEO OUTPUT 3 (SUPER) connector or SDI OUTPUT 3 (SUPER) connector. Depending on the error code, an indication of the source of the problem may appear as a secondary error message.
Error message displays
•To display error messages and codes superimposed on the monitor, set the CHARA in function menu page 4 to ON.
•Some error messages have no associated error codes. In this case, they appear over the time data area.
•Error messages with error codes are saved in non- volatile memory as an error log.
•In some cases the error message is slightly different on the monitor and in the time data area.
REEL
Chapter 14 Maintenance and Inspection |