Sony DVW-2000P L, DVW-2000, DVW-M2000, DVW-M2000P Items in the Basic Setup Menu

12-3	Items in the Basic Setup Menu
The basic setup menu contains the following items.										In the “Settings” column of the table, the factory
										default settings are indicated by an enclosing box.
Item number	Item name	Settings
001	PREROLL TIME	0S ...							... 30S: Set the preroll time to between 0 and 30 seconds. A preroll time
				5S
		of at least 5 seconds is recommended when using this unit for editing.
002a)	CHARACTER H-	Adjust the horizontal screen position of the character information output from the
	POSITION	COMPOSITE VIDEO OUTPUT 3 (SUPER) connector and the SDI OUTPUT 3
		(SUPER) connector for superimposed display on the monitor.
		00 ...		1C					... 3C (525-line mode)/00 ... 19 ... 36 (625-line mode): The
		hexadecimal value 00 is for the far left of the screen and increasing the value
		moves the position of the characters to the right.
003a), b)	CHARACTER V-	Adjust the vertical screen position of the first line of the characters information
	POSITION	output from the COMPOSITE VIDEO OUTPUT 3 (SUPER) connector and the
		SDI OUTPUT 3 (SUPER) connector for superimposed display on the monitor.
		00 ...		5C				... 71 (525-line mode)/00 ... 70 ... 88 (625-line mode): The hexadecimal
		value						00 is for the top of the screen and increasing the value lowers the
		position of the characters.
004	SYNCHRONIZE	When editing using this unit as a controller and an external VTR connected to this
		unit via a 9-pin remote control cable, this item determines whether or not to
		operate the two units in phase synchronization.
		OFF: Do not operate in phase synchronization.
		ON	: Operate in phase synchronization.
005	DISPLAY INFORMATION	Determines the kind of character information to be output from the COMPOSITE
	SELECT	VIDEO OUTPUT 3 (SUPER) connector and the SDI OUTPUT 3 (SUPER)
		connector when the function menu item CHARA is set to ON.
							: Time data display information and the unit’s status
		T&STA
		T&UB:					Time data display information and the user’s bits
		T&CTL: Time data display information and CTL
		T&T: Time data display information and time code (LTC or VITC)
		TIME: Time code (LTC or VITC) only
		If there is an overlap between the setting of this item and the setting of the control
		panel, it is automatically avoided. For example, if CTL is selected on the control
		panel and this menu item setting is T&CTL, then CTL and LTC are output.
006	LOCAL FUNCTION	Determines which buttons on the control panel are enabled when this unit is
	ENABLE	controlled from external equipment.
		DIS: All buttons and switches are disabled.
		S&E&F					: Only the STOP button, EJECT button, and F1 to F6 buttons are
		enabled.
		ENA: All buttons and switches except the RECORDER button and PLAYER
		button are enabled.
		MAP: Buttons and switches are enabled or disabled in accordance with the
		settings of menu item 023.
007	TAPE TIMER DISPLAY	Determines whether to display the CTL count in 12-hour mode or 24-hour mode.
		+ –12H				: 12-hour mode
		24H: 24				-hour mode
008	MONITORING	For recorder-player editing with only one monitor connected to the recorder,
	SELECTION FOR VTR-	determines whether the recorder is forced into E-E mode when the recorder’s
	TO-VTR EDIT	PLAYER button is pressed to view the player’s playback signals on the monitor.
		MANU			: Do not force the recorder into E-E mode.
		AUTO:			Force the recorder into E-E mode.
a) When setting items 002 and 003, watch the monitor										b) When displaying time code values, there is a slight time
screen, and adjust to the required state.										delay. Therefore, when creating a tape for off-line
										editing, the information inserted in the upper half of the
										screen may be delayed by one frame.

(Continued)

Menus Setup 12 Chapter

Chapter 12 Setup Menus 12-5