Menu items in the range 600 to 699, relating to the time code generator (Continued)

Item number

Item name

Settings

 

 

 

 

 

 

 

 

 

 

 

 

 

656

MATERIAL NO.

Select whether to inherit the UMID in the input signal when recording a UMID.

 

 

INPUT

: Inherit the UMID in the input signal, if it is present.

 

 

• Even when INPUT is selected, a new UMID is generated if the input signal

 

 

 

 

 

does not contain UMID data (the same behavior as when NEW is selected).

 

 

• When recording with inherited data, the Instance Number is newly generated

 

 

 

 

 

according to menu item 654, changing to a value that indicates that “this is a

 

 

 

 

 

copy”.

 

 

• When the UMID in the input signal is a Basic UMID, a Basic UMID is

 

 

 

 

 

recorded, even if menu item 655 is set to EXTENDED.

 

 

• When the UMID in the input signal is an Extended UMID, the recorded UMID

 

 

 

 

 

follows the setting of menu item 655.

 

 

NEW: Generate a new UMID, regardless of whether or not the input signal

 

 

contains a UMID.

 

 

• The Basic section does not change during recording.

 

 

• An Instance Number indicating that “this is the original” is generated.

 

 

• The Source Pack Date/Time (when) changes with each frame.

 

 

• The Source Pack Spatial Co-ordinates (where) are not recorded.

 

 

• The Source Pack Stored Ownership (who) can be set. (See the section “To

 

 

 

 

 

set Stored Ownership” (page 8-2)).

 

 

 

 

 

 

 

 

 

 

 

 

 

657

ESSENCE MARK TAPE

Select whether or not to output essence marks recorded on the tape during

 

OUTPUT

playback.

 

 

off

 

 

: Do not output.

 

 

on:

 

 

Output.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

When menu item 901 VIDEO OUTPUT DATA is set to “8 bit”, nothing of UMID is

 

 

output regardless of the setting of this menu item.

 

 

 

 

 

 

 

 

 

 

 

 

 

658

SHOT MARK ESSENCE

Select whether or not to convert into essence marks and output shot marks

 

MARK CONVERT

recorded in the LTC track which are detected during playback.

 

 

off

: Do not output.

 

 

SHOTM: Output.

 

 

Depending on the type of the detected shot marks, the output essence marks are

 

 

“_RecStart”, “_ShotMark1”, or “_ShotMark2”.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes

 

 

• Of the shot marks, post marks are not converted to essence marks.

 

 

• Shot mark detection timing depends on playback conditions.

 

 

• When menu item 901 VIDEO OUTPUT DATA is set to “8 bit”, nothing of UMID is

 

 

output regardless of the setting of this menu item.

 

 

 

 

 

 

 

 

 

 

 

 

 

659

AED ESSENCE MARK

Select whether or not to convert into essence marks and output events detected

 

CONVERT

during playback by the AED (Auto Event Detector).

 

 

off

 

: Do not output.

 

 

on:

 

Output.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

When menu item 901 VIDEO OUTPUT DATA is set to “8 bit”, nothing of UMID is

 

 

output regardless of the setting of this menu item.

 

 

 

 

 

 

 

 

 

 

 

 

 

660

ESSENCE MARK SD

Specify the VANC line into which to insert essence marks during video recording

 

VANC LINE

and playback.

 

 

12H, 13H, 15H, 16H,

 

, 18H, 19H (DVW-M2000/2000)

 

 

17H

 

 

9H, 10H, 12H, 13H, 14H, 15H, 16H,

 

, 18H (DVW-M2000P/2000P)

 

 

17H

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Notes

 

 

• The output VANC line during playback follows the setting for recording.

 

 

• The VANC line for SDI signal E-E output of essence marks contained in the

 

 

input SDI signal follows the input.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(Continued)

Menus Setup 12 Chapter

Chapter 12 Setup Menus 12-19