ITEM-029

STORED OWNERSHIP

COUNTRY

- XXXX

ORGANIZATION

-

YYYY

*USER

-

ABCD

2Press the F3 (PREV) and F4 (NEXT) buttons to select the item you want to set (COUNTRY, ORGANIZATION, or USER).

The selected item (example: USER) is shown in F2.

SET 029:USER

 

- ABCD

 

 

UP

ITEM

USER

PREV

NEXT

SET

EXIT

HOME

F1

F2

F3

F4

F5

F6

3Press the F2 (USER) button.

4The content of the setting is a character string (in this example “ABCD”). Select any character to change in the string by pressing the F3 (PREV) and F4 (NEXT) buttons.

The selected character flashes.

5Rotate the MULTI CONTROL knob to display the desired character in the position of the flashing character.

6Repeat steps 4 and 5 for all of the characters that you want to change.

7• If you do not want to change the other items (COUNTRY and ORGANIZATION), proceed to step 8.

•If you want to change the other items, press the F1 (ITEM) button and proceed as in steps 2 to 6.

8Press the F5 (SET) button.

The changed settings are confirmed.

To cancel changes and exit the setup menu

Press the F6 (EXIT) button.

Time zone settings

The UMID uses the UTC (Coordinated Universal Time) time standard. Setting this unit’s built-in calendar clock to the local time, and then setting a time zone to indicate the difference from global UTC standard time allows correct UMIDs to be generated. To set the time zone, display the HOME page of the function menu and proceed as follows.

See Section 11-1-2 “Using the Function Menu” (page 11-2) for more information about function menu operations.

1With the ENTRY button in the editing control section held down, press the F5 (MENU) button.

The error logger screen appears.

Refer to the Maintenance Manual Volume 1 for more information about the error logger.

2Press the F5 (SET) button.

The OFFSET TO UTC item appears.

ERR OFFSET TO UTC

+09:00

 

 

 

LOG

PREV

NEXT

–

+

SET

EXIT

HOME

F1

F2

F3

F4

F5

F6

 

ERROR LOGGER

 

(014/023)

014

REFERENCE MISSING

015

AUDIO PB CONDITION

016

VIDEO PB CONDITION

TAPE ERROR

ON

WARNING

ON

CONDITION

ON

*OFFSET TO UTC

+09:00

Push SET button

2001 12 24

23:59:59

3Press the F1 (PREV) and F2 (NEXT) button to select the OFFSET TO UTC item, and use the MULTI CONTROL knob or the F3 (–) and F4 (+) buttons to set the offset to UTC time.

For example, if the local time is 9 hours in advance of UTC, set to “+9:00”.

4Press the F5 (SET) button.

This makes the setting effective.

Functions UMID 8 Chapter

Chapter 8 UMID Functions 8-3