Monitor output
During a preview, on a monitor connected to the recorder you can monitor the following video and audio.
•From the preroll point to the IN point, you can monitor the playback from the recorder.
•From the IN point to the OUT point, you can monitor the playback from the player through the recorder in
•From the OUT point to the postroll point, you can monitor the playback from the recorder.
The following figure illustrates this.
IN point | OUT point |
| ||
|
|
|
|
|
Playback |
|
| Playback | |
(recorder) |
| (player) |
| (recorder) |
|
|
|
|
|
Editing 5 Chapter
| Tape transport |
Preroll point IN Point | OUT Point Postroll point |
Recorder |
|
Preroll | Postroll |
| Edit segment |
| Recording overlap |
| (in case of assemble |
| editing) |
| Stop |
Player |
|
Time flow
Playback
Stop
Overview
When you carry out automatic editing, the recorder and player operate as shown in the figure above, to copy the video and audio signals between the IN and OUT points on the player to the segment between the IN and OUT points on the recorder.
Monitor output
During execution of an automatic edit, as during a preview, on a monitor connected to the recorder you can monitor the following video and audio.
•From the preroll point to the IN point, you can monitor the playback from the recorder.
•From the IN point to the OUT point, you can monitor the playback from the player through the recorder in
•From the OUT point to the postroll point, you can monitor the playback from the recorder.