Menu items in the range 300 to 399, relating to editing operations (Continued)
Item number | Item name | Settings | ||||||||
|
|
|
|
|
|
|
|
|
| |
308 | SELECTION OF STD/ | Select the STD or | ||||||||
| AUTO | : Detect automatically whether the input video luminance and chrominance | ||||||||
| COMPOSITE VIDEO IN | signals are interleaved or not. If they are interleaved, select the STD mode. If | ||||||||
|
| they are not interleaved, select the | ||||||||
|
| STD: The STD mode is always used (forced STD mode). | ||||||||
|
| |||||||||
|
| (forced | ||||||||
|
|
|
|
|
|
|
|
|
| |
309 | SERVO/AV REFERENCE | Select the servo reference signal. | ||||||||
| SEL | AUTO1 | : During recording, an analog component/composite or digital input video | |||||||
|
| signal is used as the servo reference signal. During playback, the signal | ||||||||
|
| selected by the function menu item OUTREF is used as the servo reference | ||||||||
|
| signal. If the signal selected by the OUTREF setting is not connected, an | ||||||||
|
| internal reference signal is used. | ||||||||
|
| AUTO2: When the function menu item OUTREF is set to REF, and any of the | ||||||||
|
| ASSEMBLE, VIDEO, AUDIO CH1 to CH8 and TC buttons is lit, the reference | ||||||||
|
| signal for video/audio signal processing is locked to the input video signal. | ||||||||
|
| EXT: The servo reference signal is forced to be “EXT” (an external reference | ||||||||
|
| video input signal is used). | ||||||||
|
|
|
|
|
|
|
|
|
| |
310 | REC INHIBIT | Select the conditions under which recording is inhibited when the function menu | ||||||||
|
| item RECINH is set to ON. | ||||||||
|
| ALL | : All tape recording is inhibited. | |||||||
|
| CRASH: Normal tape recording is inhibited. Select this setting when you wish to | ||||||||
|
| carry out assemble editing. | ||||||||
|
| VIDEO: Inhibit recording of video and CTL signals. | ||||||||
|
| AUDIO: Inhibit recording of audio and CTL signals. | ||||||||
|
|
|
|
|
|
|
|
|
| |
|
| Note | ||||||||
|
| When the function menu item RECINH is set to ON, the REC INHI indicator on | ||||||||
|
| the lower control panel lights. If an operation inhibited by this item is attempted, | ||||||||
|
| the REC INHI indicator flashes. | ||||||||
|
|
|
|
|
|
|
|
|
| |
311 | ANALOG AUDIO EDIT | When using an editor | ||||||||
| PRESET REPLACE FOR | cannot control digital audio edit preset, select how to activate edit preset of each | ||||||||
| CH1 | digital audio channel (channels 1 to 4) on this unit using the analog audio edit | ||||||||
|
| preset function of the editor or remote controller. | ||||||||
312 | ANALOG AUDIO EDIT | |||||||||
Set edit preset of each digital audio channel of this unit on or off according to the | ||||||||||
| PRESET REPLACE FOR | |||||||||
| analog audio preset specified by the remote controller or editor. | |||||||||
| CH2 | |||||||||
| NODEF: No definition. | |||||||||
|
| |||||||||
313 | ANALOG AUDIO EDIT | |||||||||
CH1: Follow edit preset of analog channel 1. | ||||||||||
| PRESET REPLACE FOR | CH2: Follow edit preset of analog channel 2. | ||||||||
| CH3 | CH1+2: Follow edit preset of analog channel 1 or 2. | ||||||||
314 | ANALOG AUDIO EDIT | The default settings for each item are as follows: | ||||||||
|
|
|
|
|
|
|
| |||
| PRESET REPLACE FOR | 311: | CH1 |
|
| |||||
| CH4 |
|
|
|
|
|
|
|
| |
| 312: | CH2 |
|
| ||||||
|
|
| ||||||||
315 | ANALOG AUDIO EDIT | 313: |
|
|
| |||||
NODEF | ||||||||||
| RESET REPLACE FOR |
|
|
|
|
|
|
|
| |
| CUE | 314: | NODEF |
| ||||||
| 315: |
|
|
|
|
|
|
| ||
|
| NODEF |
| |||||||
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
| (Continued) | |
Menus Setup 12 Chapter
Chapter 12 Setup Menus