Parts of Function and Location 2 Chapter
CONFI (ON)/PREREAD indicators
These indicate the state of the VTR CONFI playback 1) function. When the CONFI playback function is enabled by the setting in function menu HOME page, the CONFI indicator appears, and when CONFI playback is actually being carried out the ON indicator also appears.
When F6 (PREREAD) is set to ON in function menu page 4, the CONFI playback function is disabled and one of the following is displayed.
PREREAD: Preread of both audio and video
Time data display area 2
Displays data types and time data such as the time code of edit points and the total time of that tape. The following data types are shown.
TOTL: Time value representing the total tape length.
REM: Time value representing the remaining tape length.
Either TOTL or REM appears depending on the function menu page 3 setting for F5 (T INFO). The values displayed are approximate values calculated on the basis of the detected tape diameter. They are not precise to units of seconds.
2Menu display
This displays the function menu and setup menu.
For details on the function menu, see Chapter 11 and for details on the setup menu, see Chapter 12.
5MULTI CONTROL knob and SHIFT indicator
In function menu operations, rotate the MULTI CONTROL knob to change settings that flash in the menu display section. In setup menu operations, rotate this knob to select menu items.
The SHIFT indicator lights when you press this knob in. In this state, the value of the setting changes by a greater amount when you rotate the knob.
6RESET button
To reset a CTL, time code (TC) or user bit (UB) value displayed in time data display area 1, hold this button down.
Resetting the CTL value erases all edit points.
BOT: Returned to top of tape.
EOT: Reached end of tape.
IN: video IN point
OUT: video OUT point
AIN: audio IN point
AOUT: audio OUT point
DUR: duration value
TCG (time code generator): time code generated by the internal time code generator
DOLBY NR indicator
This lights when the Dolby
Speed indication area
This indicates the speed of a DMC playback.
During a DMC playback, “DMC SPD” is displayed in time data display area 2.
7Search control section
1 SHUTTLE button
2 JOG button
3 VAR button
RECORDER |
|
|
|
| SHUTTLE/VAR | 4 SHUTTLE/VAR | |
|
|
|
| JOG | JOG | ||
|
|
| LE | VAR |
| and JOG | |
H |
|
|
| ||||
S |
| TT |
|
|
| ||
| U |
|
|
|
|
| |
REVERSE |
| FORWAR |
| indicators | |||
| D |
|
5 Search dial
..........................................................................................................................................................................................................
1) CONFI playback: This refers to playback of the audio | 2) Dolby noise reduction: Dolby noise reduction |
and video signals immediately after recording, using the | manufactured under license from Dolby Laboratories |
confidence heads, the signal being output to all intents | Licensing Corporation. “DOLBY” and the |
and purposes simultaneously with recording. This is used | symbol ; are trademarks of Dolby Laboratories |
to check recording. | Licensing Corporation. |
Chapter 2 Location and Function of Parts |