Page 2
Item | Setting | |
|
| |
F1 (V.PROC) | Selects the control method for the internal digital video processor. | |
| LOCAL: Change the settings of the internal digital video processor by using this function menu. | |
| REMOTE: Use the optional | |
| processor. | |
| MENU: Change the settings of the internal digital video processor by using the MENU of the HOME page. | |
|
| |
F2 (VIDEO) | Sets the video signal output level | |
| PRESET: Regardless of manually values, the video signal is set to the standard level. | |
| Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust | |
| the value for the video signal output level. | |
|
| |
F3 (CHROMA) | Sets the chroma signal output level | |
| PRESET: Regardless of manually set values, the chroma signal is set to the standard level. | |
| Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust | |
| the value for the chroma signal output level. | |
|
| |
F4 (HUE) (525- | Sets the color phase (phase relative to burst) | |
line mode)/ | PRESET: Regardless of manually set values, the color phase is set to the standard value. | |
(C PHAS) (625- | ||
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust | ||
line mode) | ||
| the value across the range ±30°. | |
F5 (SETUP) | Sets the setup level (525/60 mode) or black level (625/50 mode) | |
PRESET: Regardless of manually set values, the level is set to the standard value. | ||
(BLACK) (625- | ||
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust | ||
line mode) | ||
| the setup level across the range ±30 IRE (525/60 mode) or to adjust the black level across the range | |
| ±210 mV (625/50 mode). | |
|
| |
F6 (YC DLY) | Sets amount of Y/C delay. | |
PRESET: Regardless of manually set values, the Y/C delay is to the standard value. | ||
M2000P only) | ||
Manual setting: With the displayed setting flashing, you can rotate the MULTI CONTROL knob to adjust | ||
| ||
| the Y/C delay across the range ±100 ns. | |
|
|
Menu Function 11 Chapter
Chapter 11 Function Menu