Parts of Function and Location 2 Chapter
KEY INHI (inhibit) indicator
This indicator lights when the KEY INHIBIT switch on the switch panel (see page
qs PLAYER button and RECORDER button
When you carry out editing using a VTR connected to the REMOTE
PLAYER: The editing control buttons and tape transport buttons on this unit control the external player VTR.
RECORDER: The editing control buttons and tape transport buttons on this unit control the recorder, that is to say, this unit.
When this unit is being used in standalone mode, neither button functions.
qd Editing control section
1DMC EDIT button
2MEMORY indicator
3DELETE button
4TRIM buttons
5 Edit point setting buttons
|
| TRIM |
|
| IN AUDIO OUT |
DMC EDIT | DELETE | ENTRY |
|
| |
MEMORY |
| |
PREVIEW | AUTO EDIT | REVIEW |
IN OUT
6PREVIEW button
7AUTO EDIT button
8REVIEW button
1DMC EDIT button
To carry out recording of playback at any speed between
2MEMORY indicator
When memorizing the playback speed using the DMC EDIT button, this indicator flashes as the playback speed is captured to memory, and lights continuously once the speed is captured.
3DELETE button
This deletes an existing edit point.
Hold down this button and press the IN, OUT, AUDIO IN, or AUDIO OUT button which is lit, indicating an existing edit point, to delete the corresponding edit point. The button either goes off or flashes. When the button flashes, it is necessary to set the deleted edit point again.
To cancel the DMC mode, hold down the DMC EDIT button and press the DELETE button.
4TRIM buttons
Use these buttons to trim an edit point to
Hold down the IN, OUT, AUDIO IN, or AUDIO OUT button, and press one of these buttons. The ‘+’ button advances the corresponding edit point by one frame, and the
Pressing one of these buttons while holding down the PLAY button adjusts the tape speed by +8% or
5Edit point setting buttons
IN button and OUT button: To set a video IN point or OUT point, hold down the IN button or OUT button, and press the ENTRY button.
After you have made the setting, pressing the IN button or OUT button displays the video IN point or video OUT point set in time data display area 2.
AUDIO IN button and AUDIO OUT button: In insert editing, to set an audio IN point or audio OUT point separate from the corresponding video edit point, hold down the AUDIO IN button or AUDIO OUT button, and press the ENTRY button.
After you have made the setting, pressing the AUDIO IN button or AUDIO OUT button displays the audio IN point or audio OUT point set in time data display area 2.
Chapter 2 Location and Function of Parts |