12 Chapter
Resetting the menu settings to their factory default values (menu item B20)
To reset the current active menu settings to their factory default values, proceed as follows.
|
| Recall (B01) |
|
|
| Save | ||
Current active |
| Menu bank 1 | ||||||
|
|
|
| |||||
Save (B11) |
|
| ||||||
menu settings |
|
| ||||||
|
|
|
|
|
|
|
|
|
a)
Recall (B02)
Menus Setup
1 Perform steps 1 to 3 of the procedure described in |
the section “To change the settings of menu items |
without |
B20 RESET SETUP to ON. |
Save (B12)
Menu bank 2
a)
The current active menu settings are reset to their factory default settings.
2Press the F5 (SET) button again. This saves the menu settings.
Menu bank operations (menu items B01 to B13)
This unit allows menu settings to be saved in what are termed “menu banks”. Saved sets of menu settings can be recalled for use as required.
To save the current active menu settings Set one of menu items B11 SAVE BANK 1 to B13 SAVE BANK 3 to ON, depending on which of the menu banks you wish to save in, then press the F5 (SET) button.
To recall settings from a menu bank When recalling the settings saved in one of menu banks 1 to 3, set the corresponding one of menu items B01 RECALL BANK 1 to B03 RECALL BANK 3 to ON, then press the F5(SET) button.
When you wish to recall the settings saved in menu bank 4, select
For details about menu bank 4, refer to the Maintenance Manual.
Recall (B03) |
|
Save (B13) | Menu bank 3 |
|
a)
Recall (B20)
Save | a) | Menu bank 4 |
a) Use maintenance menu item 122.