Sony MDS-JE530 manual 22GB, Synchro-recording With a Sony CD Player CD, Press H or X on the deck

Recording on MDs

Synchro-recording With a Sony CD Player (CD

Synchro-recording)

Operations you may want to do during CD Synchro-recording

To	Press
Stop recording	CD-SYNC STOP
Pause recording	CD-SYNC STANDBY or CD
	PLAYER X
Locate the next track to be	CD PLAYER ./>
recorded during recording
pause
Resume recording after	CD-SYNC START or CD
pausing	PLAYER X
Check the remaining	TIME on the deck (page 12)
recordable time on the MD

zYou can use the remote of the CD player during CD Synchro- recording

Press	To change the deck to	And change the CD player to
H	Recording	Play
x	Recording pause	Stop
X	Recording pause	Pause

zDuring CD Synchro-recording, track numbers are marked in the following ways:

• When the CD player is connected to the DIGITAL IN connector, track numbers are automatically marked as they appear on the CD.

• When the CD player is connected to the LINE (ANALOG) IN jacks, track numbers are automatically marked when “T.Mark Lsyn” has been selected (page 19).

• When you resume recording after recording pause, a new track number is automatically marked, regardless of the track marking parameter setting (“T.Mark Lsyn” or “T.Mark Off”).

zYou can change CDs during CD Synchro-recording

1Press x on the CD player’s remote.

2Change the CD.

3Press H on the CD player’s remote. Recording resumes.

zYou can also perform synchro-recording with a Sony video CD player

By reprogramming the MD’s remote, you can use the procedure above to perform synchro-recording with a Sony video CD player.

Press number button 2 while pressing down ~/1 on the MD deck’s remote. You can now operate the MD deck and the video CD player with the remote. To control the CD player again, press number button 2 while pressing down ~/1 on the MD deck’s remote.

zDuring CD Synchro-recording, the deck copies CD text information (CD text and disc memos) as it is to the MD (Disc Memo Copy Function)

The Disc Memo Copy function operates when you make a CD Synchro-recording from a Sony CD player connected with a control A1 cable (not supplied) to the MD deck.

Notes

•When performing CD Synchro-recording with a CD player with a mode selector, be sure to set the selector to CD1.

•When you record tracks from certain CD or multi-disc players, the entire material may be recorded as a single track.

•The Disc Memo Copy Function may not operate for extremely short CD tracks.

•Text information may not be copied for some CDs.

Making a CD Synchro-recording from a

Sony CD player connected with a control A1 cable (not supplied)

1Do steps 1 to 3 of “Synchro-recording with a Sony CD player” on page 21.

2Set the CD player to playback pause mode.

3Press REC z on the deck.

The MD deck changes to recording pause.

4Press H or X on the deck.

The deck starts recording and the CD player starts to play. When CD play finishes, recording stops.

22GB