Sony MDS-JE530 36GB, Naming a Track or MD, Naming a track or MD using the controls, on the deck

Editing Recorded MDs

Naming a Track or MD

Naming a track or MD using the controls

on the deck

1Press MENU/NO while the deck is in one of the operating statuses listed below, depending on what you want to name:

To name	Press while the deck is
A track or the MD	Stopped, playing, or paused
The track being recorded	Recording the track

“Edit Menu” appears in the display.

2Turn AMS until “Name ?” appears, then press AMS or YES.

While the deck is recording, a flashing cursor appears in the display and you can enter a name for the track being recorded. In this case, go to step 6.

3Turn AMS until “Nm In ?” appears, then press AMS or YES.

4Turn AMS until the track number (when naming a track) or “Disc” (when naming the MD) flashes, then press AMS or YES.

5Press AMS or YES again.

A flashing cursor appears.

6Press LEVEL/DISPLAY/CHAR repeatedly to select the character type.

To select	Press repeatedly until
Uppercase letters	“A” appears in the display
Lowercase letters	“a” appears in the display
Numbers	“0” appears in the display
Symbols	“!” appears in the display

7Turn AMS to select the character.

The selected character flashes.

To change a selected character

Repeat steps 6 and 7.

8Press AMS.

The selected character is entered and lights continuously. The cursor shifts to the right, flashes, and waits for the input of the next character.

9Repeat steps 6 to 8 to enter the rest of the name.

To change a character

Press m/M repeatedly until the character to be changed flashes, then repeat steps 6 to 8.

To erase a character

Press m/M repeatedly until the character to be erased flashes, then press CLEAR.

10Press YES.

The whole name appears in the display.

To cancel the operation

Press MENU/NO or x.

zYou can undo the naming of a track or MD

For details, see “Undoing the Last Edit” on page 39.

To enter a space

Press M while the cursor is flashing.

36GB