Using a Timer
Make sure to change the deck to standby status within a week after timer recording is completed.
The TOC on the MD is updated and recorded contents are written to the MD when you turn the deck on. If the recorded contents have disappeared, “Initialize” flashes when you turn the deck on.
Notes
•It may take about 30 seconds after the deck is turned on until recording starts. When recording at a specified time using the timer, be sure to take this time into account when setting the recording start time.
•During timer recording, new material is recorded from the end of the recorded portion on the MD.
•Material recorded during timer recording will be saved to the disc the next time you turn the deck on. “TOC Writing” will flash in the display at that time. Do not disconnect the mains lead or move the deck while the indication flashes.
•Timer recording will stop if the disc becomes full.
