Sony MDS-JE530 manual Hooking Up the Audio Components, Required cords, hooking up the system

Hooking Up the Audio Components

CONTROL A1 Mains lead

Getting Started

Amplifier,

etc.

CD player, DBS tuner

CD player, DBS tuner*, Digital

amplifier, DAT deck, MD deck, etc.**

*Digital equipment with a DIGITAL OUT connector only

**Digital equipment with both DIGITAL IN and OUT connectors

Required cords

Audio connecting cords (2) (supplied)

When connecting an audio connecting cord, be sure to match the colour-coded pins to the appropriate jacks: white (left) to white and red (right) to red.

White (L) White (L)

Red (R) Red (R)

Optical cables (2) (only one supplied)

•When connecting an optical cable, take the caps off the connectors and insert the cable plugs straight in until they click into place.

•Do not bend or tie the optical cables.

Things you should keep in mind while

hooking up the system

•Turn off the power to all components before making any connections.

•Do not connect any mains lead until all the connections are completed.

•Be sure the connections are firm to prevent hum and noise.

Jacks (connectors) for connecting audio

components

Connect	To the
Amplifiers	LINE (ANALOG) IN/OUT jacks
CD players or DBS tuners	DIGITAL COAXIAL IN jack or
	DIGITAL OPTICAL IN connector

Coaxial digital connecting cable (1) (not supplied)	Digital amplifiers, DAT decks,	DIGITAL OPTICAL IN/OUT
	or another MD deck	connectors

5GB