Sony MDS-JE530 Fade In and Fade Out, 41GB, Finely controlling the pitch Fine Control, Function

Finely controlling the pitch (Fine Control

Function)

You can fine control the playback speed in 0.1% increments from –98.5% to +12.5%.

1While the deck is playing, press MENU/NO twice.

“Setup Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “Pfine” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) until the desired value appears, then press AMS or YES.

4Press MENU/NO.

Notes

•The playback sound drops out momentarily when you change the fine control value.

•The fine control value reverts to “0%” (factory setting) when you turn off the deck or eject the MD.

•The step and fine control values are linked; changing one value also changes the other.

Fade In and Fade Out

You can use Fade-in Play to gradually increase the signal level to the LINE (ANALOG) OUT jacks and the PHONES jack at the start of playback. Fade-out Play gradually decreases the signal level at the end of playback.

Fade-in Recording gradually increases the signal level at the start of recording. Fade-out Recording gradually decreases the signal level at the end of recording.

` / 1

A

FADER

FADER

X . >

H X

z x

. >

m M

Note

The level of the signal output from the DIGITAL OUT connector does not change during Fade-in Play nor Fade-out Play.

Fade-in Play and Fade-in Recording

During play pause (for Fade-in Play) or recording pause (for Fade-in Recording), press FADER.

bflashes in the display and the deck performs Fade-in Play or Fade-in Recording for five seconds (factory setting) until the counter reaches “0.0s.”

Other Functions

41GB