Sony MDS-JE530 manual Display Messages, 49GB

Display Messages

The following table explains the various messages that appear in the display. Messages are also displayed by the deck’s Self-Diagnosis function (see page 51).

Message	Meaning
Auto Cut	The Auto Cut function is on (page 18).
Blank Disc	A new (blank) or erased MD has been
	inserted.
Cannot Copy	An attempt was made to make a second
	copy from a digitally dubbed MD (page
	15).
Cannot Edit	An attempt was made to edit the MD
	during Programme or Shuffle Play. Or
	the MD is record-protected.
Disc Full	The MD is full (page 46).
Impossible	The deck cannot do the specified
	operation (pages 16 and 33).
Initialize (flashing)	The Setup Menu settings have been lost.
	Or the contents recorded by timer have
	disappeared over time and are not be
	available for saving to disc, or
	Programme Play could not be activated
	since the programme has disappeared
	over time.
	(The message flashes for about four
	seconds when you turn on the deck by
	pressing +/1.)
Name Full	The naming capacity of the MD has
	reached its limit (about 1,700 characters).
No Disc	There is no MD in the deck.
No Name	The track or disc has no name.
No Program!!	You tried to start Programme Play when
	no programme exists.
Premastered	An attempt was made to record on a
	premastered MD.
ProgramFull!	The programme contains the maximum
	number of tracks. You cannot add any
	more tracks.
REMOTE	The MD is being controlled by an
	external device connected to the deck.*
Smart Space	The Smart Space function is on (page 18).
TOC Reading	The deck is checking the TOC (Table Of
	Contents) on the MD.

*If “REMOTE” appears under other circumstances, turn off the deck, then turn it on again.

Additional Information

49GB