Sony MDS-JE530 manual 37GB, Naming a track or MD using the remote Z, Copying a track or disc name

Naming a track or MD using the remote Z

1Press NAME while the deck is in one of the operating statuses listed below, depending on what you want to name:

To name	Press while the deck is
A track	Playing, paused, recording, or stopped with
	the track number displayed
The MD	Stopped with no track number displayed

A flashing cursor appears in the display.

2Press CHAR repeatedly to select the character type.

To select	Press repeatedly until
Uppercase letters	“AB” appears in the display
Lowercase letters	“ab” appears in the display
Numbers	“12” appears in the display

3Enter a character.

If you’ve selected uppercase or lowercase letters

1Press the corresponding letter/number button repeatedly until the character to be entered flashes.

Or, press the button once and press ./> repeatedly.

To select symbols, press . repeatedly while “A” is flashing.

2Press M.

The flashing character is entered and lights continuously and the cursor shifts to the right.

If you’ve selected numbers

Press the corresponding number button.

The number is entered and the cursor shifts to the right.

4Repeat steps 2 and 3 to enter the rest of the name.

To change a character

Press m/M repeatedly until the character to be changed flashes, press CLEAR to erase the character, then repeat steps 2 and 3.

5Press NAME.

The whole name appears in the display.

To cancel the operation

Press MENU/NO or x.

zYou can undo the naming of a track or MD

For details, see “Undoing the Last Edit” on page 39.

Copying a track or disc name

You can copy an existing track or disc name and use it to name another track on the same disc or the disc itself.

1While the deck is stopped, playing, or paused, press MENU/NO.

“Edit Menu” appears in the display.

2Turn AMS (or press ./> repeatedly) until “Name ?” appears, then press AMS or YES.

3Turn AMS (or press ./> repeatedly) until “Nm Copy ?” appears, then press AMS or YES.

4Turn AMS (or press ./> repeatedly) until the number of the track (when copying the track name) or “Disc” (when copying the disc name) flashes, then press AMS or YES to copy the selected name.

When “No Name” appears in the display

The selected track or disc has no name.

5Turn AMS (or press ./> repeatedly) until the number of the track (when naming a track) or “Disc” (when naming a disc) flashes, then press AMS or YES to enter the copied name.

“Complete!!” appears for a few seconds and the name is copied.

To cancel the operation

Press MENU/NO or x.

Editing Recorded MDs

37GB