Sony PCNA-MR10 manual Attaching the ferrite core, To attach the ferrite core

Setting Up RoomLink

Attaching the ferrite core

In accordance with FCC Rules, Part 15, a ferrite core is supplied with the network media receiver. The ferrite core should be attached to the network cable*, to reduce or eliminate electrical interference.

1Open the ferrite core and place the core approximately 3-4 inches from the end of the network cable.

2Wrap the network cable twice around the ferrite core, lengthwise, with the cable running directly through the center groove of the core.

3Close the ferrite core tightly around the network cable until the core locks.

To attach the ferrite core

Ethernet port

Ferrite core

* The network cable must be compatible with the 100BASE-TX standard.

29