RoomLink User Guide
5Use the direction arrow buttons to highlight OK, then press the SELECT button.
RoomLink™ prepares to download the firmware update. The POWER/REC indicator starts blinking (red) slowly.
Once you have started the firmware update process, do not attempt to stop or cancel it. All buttons on the Remote Commander are disabled during the update.
6On your VAIO® computer, start the update tool and begin updating the system software of the network media receiver.
During the download, the POWER/REC indicator starts blinking rapidly. Do not unplug the AC power cord or the network cable during the download.
When the update is completed, the network media receiver goes into Standby mode.
✍All settings except for the IP address are reset to the default settings, once the update is completed. The firmware update takes approximately three minutes to complete.
Resetting to the original factory settings
You can reset these features to the original factory default settings:
❑Initial screen
❑IP address
❑Recording mode
❑Live mode
❑Default server (VAIO® computer)
❑Slide Show intervals
❑Slide Show looping (continuous play)
To reset the original factory settings:
1On the Remote Commander® unit, press the MAIN MENU button. The Main Menu appears.
2Highlight Settings, then press the SELECT button. The Settings screen appears.
68 |
