Sony PCNA-MR10 manual Wanlan

RoomLink User Guide

ENVIRONMENT 7: Connecting multiple VAIO computers (Under conditions similar to Environment 5 and 6)*

Connecting in Environment 7

VAIO® Computer #1

WANLAN

To Ethernet port

Network cable (sold separately)

To Ethernet port

Network switch* or Router device with a built-in network switch**

(sold separately)

To Ethernet port

Network cable with ferrite core†

(supplied) RoomLink™

*If connecting with a multiple port network switch device (sold separately), the VAIO computer requires a fixed IP address.

VAIO® Computer #2

Network cable (sold separately)

**Use a router device or a multiple port network switch device that is compatible with 100BASE-TX standard. A WAN connection is not necessary.

†Attach the supplied ferrite core to the supplied network cable, before connecting the cable to the network media receiver.

Connections may vary, depending on your network environment. Contact your Internet Service Provider for connection information.

* For information on fixed IP addresses, see “Assigning a fixed IP address” on page 47.

42