RoomLink User Guide
Operating RoomLink
Start the network media receiver after you have finished setting up the hardware connections to your VAIO® computer and TV. Before using RoomLink™ with your VAIO® computer and TV, set up and configure your software as described in the section, “Configuring Software for Use with RoomLink” on page 51.
To begin using RoomLink
1If applicable, turn on the router using the power button or switch.
2Turn on your VAIO computer by pressing the power button, located on the front panel.
3Turn on your TV by pressing the TV Power button on the Remote Commander® unit.
4Switch the input connection to the network media receiver by pressing the TV/Video button on the Remote Commander. See “Remote Commander” on page 22, for details on button functions.
5Turn on the network media receiver by pressing the POWER button on the Remote Commander.
✍When the Standby indicator light is red (dimmed), RoomLink™ is ready to be turned on. The Standby indicator takes approximately 20 seconds to light after the AC adapter is plugged into a wall outlet.
The Power/Rec indicator lights and the Main Menu screen appears.
To stop using RoomLink
1Turn off RoomLink™ by pressing the POWER button on the Remote Commander.
The Power/Rec indicator turns off and the Main Menu screen no longer appears on your TV screen.
2Turn off your TV by pressing the TV Power button on the Remote Commander.
3Turn off your VAIO computer using these steps:
1 Click Start in the Windows® taskbar and click Shut Down. 2 Click Shut Down.
50 |
