RoomLink User Guide
Configuring Default Settings
You can conveniently access certain RoomLink features and functions by customizing the default settings for your network media receiver and VAIO® computer.
Connecting to a server automatically
You can set RoomLink to automatically connect to a VAIO® computer (server), when accessing the TV, Video, Music, or Photo content. These steps establish a specific VAIO computer as the default server for the TV, Video, Music, and Photo features available through the network media receiver. Repeat these steps for each feature.
1Turn on your VAIO computer by pressing the power button, located on the front panel.
2If applicable, turn on the router using the power button or switch.
3Turn on your TV by pressing the Power button in the TV control section of the Remote Commander® unit.
4Switch the input connection to the network media receiver by pressing the TV/VIDEO button on the Remote Commander.
5Turn on the network media receiver by pressing the POWER button on the Remote Commander.
✍When the Standby indicator light is red (dimmed), RoomLink™ is ready to be turned on. The Standby indicator takes approximately 20 seconds to light after the AC power cord is plugged into a wall outlet.
The network media receiver’s Power/Rec indicator lights and the Main Menu screen appears on your TV.
6Use 
/ 
buttons on the Remote Commander to select a feature, such as TV - Watch and record TV programs. Press SELECT.
The Select a server screen appears, listing the names of the available servers.
✍If the status of a server is shown as 
, try selecting Connect from the submenu, the press the SELECT button on the Remote Commander.
58 |
