RoomLink User Guide
Setting up the Remote Commander unit
1Open the battery cover on the back of the Remote Commander® unit.
2Insert two AA batteries (supplied) by matching the + and - on the batteries, with the diagram inside the battery compartment.
Inserting batteries into the Remote Commander
✍Under normal use, the AA batteries may last up to six months. If your Remote Commander does not operate properly, the batteries may need replacing. If your Remote Commander is not being used for long periods of time, remove the batteries to avoid possible damage from leaking batteries.
To program the Remote Commander
Your Remote Commander® unit is preprogrammed to control certain TVs. Refer to your TV manufacturer’s code table for more information. The Remote Commander may not be compatible with some TV models, even when the appropriate TV manufacturer code is entered.
1Press and hold the SELECT button.
2Enter your TV code number, using the channel number buttons.
3Release the SELECT button after you have entered the TV code number.
✍After replacing the batteries in your Remote Commander, the TV manufacturer’s code may require resetting. Reset the code each time you replace the batteries.
30 |
