
About Recording and Playback
The server is listed as “Unknown”
When is shown for a server, RoomLink™ does not recognize the computer’s availability and fails to connect.
Try the following steps:
1Using the Remote Commander, select Connect from the
2Press OK.
If these steps do not connect the server, check the following:
❑If necessary, bring the computer out of Standby or Hibernate mode. (You can configure your computer to enable the network media receiver to automatically resume from Standby or Hibernate modes.)
❑Verify the computer is turned on.
❑Verify the network cable connections are secure.
❑If using a network switch device or a router device with a
❑Verify the network status is up.
The “Select a server” screen always appears
You can set RoomLink™ to stop displaying the Select a server screen every time you access a feature, such as TV, Video, Music or Photo. Preset a default server for each feature. See “Connecting to a server automatically” on page 58, for details.
About Recording and Playback
The recording stops after 30 minutes
❑This RoomLink recording feature is preset to automatically stop 30 minutes after pressing the REC button. After you start recording, the length of the recording session can be extended by
❑You may not have enough hard drive space on your VAIO® computer. Delete unnecessary files to free up additional space.
117 |