Message

Meaning

 

 

The remote terminal may not be registered

Contact the gatekeeper administrator regarding registration of the remote party

 

 

in gatekeeper. Contact the gatekeeper

terminal.

 

 

administrator.

 

 

 

 

 

 

 

Call not responded.

Check connections of videoconferencing equipment at the remote party.

 

 

 

 

 

 

The entered password for the encryption

Enter the correct password.

 

 

feature is not correct.

 

 

 

 

 

 

 

At least thirteen characters are required as

The password required for conducting videoconference using LAN encryption

 

 

a password for the encryption feature.

must be between 13 and 20 characters long.

 

 

 

 

 

 

Temperature is abnormal. The power will

The system is shutting down because abnormal temperature was detected.

 

 

turn off.

 

 

 

 

 

 

 

Check the line interface or the IP address is

Check whether the line type and IP address settings in the LAN Setup menu are

 

 

set correctly.

correct.

 

 

 

 

 

 

No camera device is detected.

The camera could not be detected for some reason.

 

 

 

 

 

 

GateKeeper error.

Check the remote party address.

 

 

 

 

 

 

Gatekeeper does not respond.

Check the gatekeeper settings.

 

 

 

 

 

 

Gatekeeper does not respond.

User name and user number were entered, but the call could not proceed. Contact

 

 

 

the gatekeeper administrator or enter the IP address of the remote party and retry

 

 

 

the call.

 

 

 

 

 

 

Connection has been rejected as the data

The connection requirements exceed the bandwidth limitations of the gatekeeper.

 

 

exceeds the bandwidth of a gatekeeper.

 

 

 

 

 

 

 

Gatekeeper registration error. Check LAN

Contact the gatekeeper administrator for information about gatekeeper registration

 

 

configuration.

for the remote party terminal.

 

 

 

 

 

 

The conference could not start because the

Connection cannot be established if the encryption function on the remote site is

 

 

encryption feature at the near-end side was

on while the encryption function on the local site is off.

 

 

disabled.

 

 

 

 

 

 

 

RGB input signal not acceptable.

The RGB input signal in use is not compatible.

 

 

 

 

 

 

Communication ends.

Steps for ending a videoconference were completed successfully.

 

 

 

 

 

 

Communication starts!

Connection was established successfully and the videoconference can be started.

 

 

 

 

 

 

No more entries can be registered.

The maximum number of entries for the Phone Book has been reached.

 

 

 

 

 

 

The system will be reset.

The system is restarting.

 

 

 

 

 

 

The terminal with the specified IP address

Connection to the remote party could not be established. Check whether the

 

 

does not exist, or the system is turned off.

specified IP address is correct, or have the remote party turn the power on.

 

 

 

 

 

 

Please wait.

Data are being saved.

 

 

 

 

 

 

Dialing your own number is invalid.

Check the address for the remote party.

 

 

 

 

 

 

Now upgrading. Wait for a while. Be sure

The software version of a camera device, LCD, or other equipment is being

 

 

not to turn off your system while upgrading.

upgraded. Do not turn power off until the upgrade process is completed.

 

 

 

 

 

 

Still image saved to Memory Stick.

The still image was saved on the “Memory Stick”.

 

 

 

 

 

 

The still image has been sent.

Still image data were sent.

 

 

 

 

 

 

Incorrect still image format. Progressive

A JPEG file on the “Memory Stick” could not be decoded. The Progressive JPEG

 

 

JPEG is not supported.

format is not supported.

 

 

 

 

 

 

A still image is being sent or received. The

Wait until still image transmission is completed before using the Data Solution

 

 

Data Solution Module (DSM) cannot be

Module (DSM).

 

 

used.

 

 

 

 

 

 

 

Still image transmission cancelled.

The still image transmission was cancelled.

 

 

 

 

 

 

The still images were not sent.

The still image sending attempt failed.

 

 

 

 

 

 

The software upgrade is complete. The

The software upgrading process has completed normally.

 

 

 

system will now restart.

 

 

 

 

 

 

 

 

 

 

 

 

 

Input title.

Enter an index title.

 

 

 

 

 

 

Appendix

 

Network congestion: Try again later.

Available bandwidth is limited due to network congestion.

 

 

 

 

moment. Some pictures may appear

impaired.

 

 

The network is heavily congested at the

Data losses are occurring due to heavy network traffic. Video/audio quality may be

 

 

distorted.

 

 

 

 

 

 

 

Adjusting the white balance. Please wait.

The white balance is being adjusted. When cancelled, the message will disappear,

 

 

 

but the camera adjustment process is not cancelled.

 

 

 

 

 

 

The Data Solution Module (DSM) cannot be

The Data Solution Module cannot be used.

 

 

used.

 

 

 

 

 

 

 

The power will turn off. Please wait.

The system is shutting down.

 

 

 

 

110 On Screen Messages