Sony PCS-TL33 manual 111

Message	Meaning
Name is not translated to IP address (DNS	Check the DNS settings.
error). Check LAN configuration.
Reference to DNS has failed. Check LAN	When using a domain name server, the name for the remote party was entered,
configuration.	but LAN connection could not be established. Enter the IP address and dial again.
Now upgrading. Wait for a while.	The LCD software version is being upgraded. Do not turn power off until the
	upgrade process is completed.
Wrong password.	Enter the correct password.
Check the user name or user number for	Enter the correct user name and user number.
dialing is correct.
Busy line - Connection not possible.	Cannot connect because remote party is busy.
File error.	There is a problem with the file.
File size error.	The file size allocation is wrong.
File decode error.	A JPEG file could not be decoded.
Format error.	The “Memory Stick” could not be formatted.
Unknown device is connected.	An unknown device has been connected to the mouse port.
Unknown network error: Try again later.	Try dialing once more.
Use of the Private Phone Book is available.	A “Memory Stick” containing Private Phone Book data was inserted. The Private
	Phone Book function can be used.
Use of the Private Phone Book is not	A “Memory Stick” containing Private Phone Book data was removed. The Private
available.	Phone Book function can no longer be used.
Preset 1 (- 6) selected.	Camera angle and zoom has been changed to the settings stored in preset
	number 1 (- 6).
Registered to Preset number 1 (- 6).	Camera angle and zoom settings have been stored in preset number 1 (- 6).
The presentation screen will not be sent.	The current presentation screen cannot be handled by the DSM. Set the PC
	screen resolution to XGA or lower.
White balance adjustment will be	The white balance can be adjusted manually.
performed. Press the “Start” button and wait
a few moments.
Microphone is turned off.	The microphone cannot be used.
Microphone is turned on.	The microphone can be used.
Mouse detected.	Mouse is connected to the Video Communication System.
No mouse is detected.	Mouse is not connected or connected to the PC side.
Memory Stick file decode error.	A JPEG file on the “Memory Stick” could not be decoded.
Memory Stick error.	The “Memory Stick” format is different.
Memory Stick file error.	The “Memory Stick” file format is different, or the file is damaged.
Memory Stick file size error.	The “Memory Stick” file size allocation is wrong.
No Memory Stick.	No “Memory Stick” is inserted.
Memory Stick write-protected.	Change the position of the LOCK slider on the rear of the “Memory Stick”.
There are no images recorded in the	No image files are stored on the Memory Stick.
Memory Stick.
Memory Stick full.	There is not enough free capacity on the “Memory Stick”.
Memory full.	The “Flash Memory” does not have enough free space.
The cooling fan is malfunctioning.	There is a problem with the cooling fan.
Registration failed	The synchronization with the SIP server failed.
Registration Confirmed	The synchronization with the SIP server is established.
Router is not supported.	Make sure that you are using a router that is supported and that the router settings
	are correct.
		Appendix
Confirm the router’s port settings.	Check the router settings.
Authentication error. Check that the	Check the password.
password is correct.
Authentication error. Check that the ID is	Check the ID.
correct.
The dialed party does not exist. Check that	Check the remote party’s settings.
the number is correct.
The call request has timed out.	Cannot connect due to a problem with the network or the remote party not
	answering within a specific time.

On Screen Messages 111