Sony PCS-TL33 When the PCS-11/11Pis used as a receiving terminal, When other videoconferencing system such as the PCS-1600is used

Module Solution Data Using Conference Data 5 Chapter

When the PCS-1/1P, PCS-G70/G70P, or PCS-G50/G50P is used as a receiving terminal

Monitor used to	Output connector	Resolution	Video	Picture quality
display the picture	for a computer		frame
of the Data	picture on		rate
solution Box	receiving terminal
VIDEO OUT 1 or	VIDEO OUT 1 or	a	a	Outputs the signal by converting a transmitted VGA,
VIDEO OUT 2	VIDEO OUT 2 on			SVGA or XGA signal into a 4CIF signal. The original high-
	the communication			resolution picture cannot be obtained and details cannot
	terminal			be clearly seen. The number of frames displayed per
				second depends on the interface transmission rate. For
				example, one frame per second is obtained at 1 Mbps.
RGB OUT	RGB OUT on the		a	Outputs the signal by converting a transmitted VGA,
	communication			SVGA or XGA signal into an XGA signal. The high-
	terminal			resolution picture can be obtained. The number of frames
				displayed per second depends on the interface
				transmission rate. For example, one frame per second is
				obtained at 1 Mbps.
DSB	RGB OUT on the			Outputs the signal by converting a transmitted VGA,
	PCSA-DSB1S (only			SVGA or XGA signal into an XGA signal. The high-
	when the PCSA-			resolution picture can be obtained. You can view more
	DSB1S is enabled)			vivid picture than the picture output from the RGB OUT
				connector on the Communication Terminal. The number of
				frames displayed per second depends on the interface
				transmission rates. For example, five frames per second is
				obtained at 1 Mbps (three frames per second with a XGA
				transmission).
				: High, a: Middle, f: Low

For the settings for output of the picture from each output connector, see the Operating Instructions supplied with the PCS- 1/1P, PCS-G70/G70P, or PCS-G50/G50P.

When the PCS-11/11P is used as a receiving terminal

Resolution	Video	Remarks
	frame rate
a	a	Outputs the signal by converting a transmitted VGA, SVGA or XGA signal into a 4CIF signal. The
		original high-resolution picture cannot be obtained and details cannot be clearly seen. The number
		of frames displayed per second depends on the interface transmission rate. For example, one frame
		per second is obtained at 1 Mbps.
		: High, a: Middle, f: Low

When other videoconferencing system such as the PCS-1600 is used

Resolution	Video	Remarks
	frame rate
a	f	Sends and receives the pictures in 4CIF, and the original high-resolution picture cannot be obtained
		and detailed portion cannot be clearly seen. The number of frames displayed per second depends
		on the interface transmission rates. For example, one frame per several seconds is obtained.
		: High, a: Middle, f: Low

76 Using Video From Connected Equipment for a Conference