Module Solution Data Using Conference Data 5 Chapter

Installing the DataSolution Module

 

2

1

 

 

Connector

Notes

 

 

 

 

• Be sure to turn the power to all components off before

 

 

 

starting the installation.

 

 

 

• When the Data Solution Module has been connected and

 

 

 

is used for the first time, the Video Communication

2

 

 

System may automatically upgrade the software of the

 

 

 

 

 

Data Solution Module. While the upgrading message is

 

 

 

displayed, never turn off the Video Communication

 

 

 

System, to prevent the possibility of serious system

 

 

 

damage.

 

Mini D-sub 15-pin cable

Projector or

 

 

1 Remove the rear cover.

 

(commercially available)

similar

4 Replace the rear cover of the PCS-TL33.

 

Pull the cover off towards you.

 

Push the cover in while aligning the four stubs.

2 Remove the DSM connector cover.

Connector cover

3 Connect the system connector of the Data Solution Module to the DSM connector of the PCS-TL33 and secure with fastening screws.

72 Installing the Data Solution Module