Preparing for a Videoconference Using

SIP

Installing the SIP Software

Notes on installing the SIP software

You cannot install the software if the write-protect tab on the “Memory Stick” in which the SIP software is stored is set to “LOCK”.

Once the SIP software is installed in the Video Communication System, the software will not be used again.

You cannot install SIP software which is copied to another “Memory Stick” with a computer, etc.

1 Turn the power off.

2 Insert the “Memory Stick” containing the PCSA-SP1 SIP software into the Memory Stick slot.

Insert the “Memory Stick” in the direction of the arrow on it.

Chapter

software

 

PCSA-SP1 SIP

7

 

Videoconference

3 Turn the power on.

 

SIP Using

The SIP software is installed in this system.

Making Settings for SIP

 

You can set items regarding a videoconference using SIP under “SIP Setup” in the Network Setup menu.

1 On Page 1/3 of SIP on the Network Setup menu, set the “SIP Server Mode” item to “On”.

Note

The “SIP Setup” item on the Network Setup menu appears only when SIP software has been correctly installed.

82 Preparing for a Videoconference Using SIP

LAN

SIP

 

1/3

SIP Server Mode

On

Off

SIP

Transport Protocol

UDP

 

 

 

 

Port Number

5060

 

 

SIP Domain

 

 

 

Registered User Name

 

 

 

Password

 

 

 

Primary

 

 

 

Proxy Server Address

 

 

 

Proxy Port

5060

 

 

Registrar Server Address

 

 

 

Registrar Port

5060

 

 

OK

Cancel

 

Right-click the mouse to display a help message.

IP:012.345.678.912

2 Enter the address and SIP domain name for the SIP server that is being used (proxy server or registrar server).

Note

Make the settings for any other items as well, as required.

3 Enter the “Registered User Name” and “Password”.

4 Click “OK”.

The status of the synchronization with the SIP server is displayed.

Registration Confirmed: The synchronization with the SIP server is established.

Registration Failed: The synchronization with the SIP server failed.

For details on how to make settings, see “Network Setup Menu” on page 27.

To select the Line I/F

You can set “SIP” as the default line interface selection for the launcher menu by setting “Line I/F” to “SIP” in the Dial settings of the Communication Mode menu.

For details, see “Communication Mode Menu” on page 29.

Registering Remote Parties in the Phone Book

The basic procedure for registration is the same as the registration of a remote party for a point-to-point videoconference. For details, see “Registering a New Remote Party” on page 38.