Audio Setup Menu
The Audio Setup menu is used to set various audio items.
Call Volume
Use this item to set the speaker/headphone volume for videoconferences.
Page 1/1
The level meter indicating the audio input level is displayed.
Audio Setup |
|
|
Mic Lavel Meter |
|
|
Beep Sound | On | Off |
Sound Effect | On | Off |
Dial Tone | On | Off |
Ringer Level | Min |
|
Headphone Ringer Level | Min |
|
PC Volume |
|
|
Call Volume |
|
|
OK | Cancel |
|
| IP:012.345.678.912 |
Beep Sound
Selects whether the beep sounds when you perform a mouse operation.
On: Enables beep.
Off: Disables beep.
Sound Effect
Selects whether or not to output the sound when the system starts up, a videoconference starts, a videoconference ends, or a videoconference using SIP is put on hold.
On: Outputs the sound.
Off: Does not output the sound.
Dial Tone
Selects whether or not to output a dial tone when you are dialing.
On: Outputs the dial tone.
Off: Does not output the dial tone.
Ringer Level
Selects the ringer volume when you receive a call. To disable the ringer tone, select the “Off” setting.
To use the ringer tone, select one of the following settings: “Min”, “Mid”, “Loud”.
Headphone Ringer Level
Use this item to select the headphone ringer volume for incoming calls.
To disable the ringer tone, select the “Off” setting.
To use the ringer tone, select one of the following settings: “Min”, “Mid”, “Loud”.
PC Volume
Use this item to set the speaker/headphone volume for the computer display.
Network Setup Menu
Lets you make LAN and SIP related settings.
For details on the settings, consult with the network administrator.
For details on setting up each network using LAN, see “Setting Up the Network Configurations” on page 43.
For details on videoconferencing using SIP, see chapter 7.
Note
The SIP Setup menu can be accessed only if the optional SIP software
LAN | LAN |
| 1/3 | |
DHCP Mode | Auto | Off | ||
| ||||
SIP | Host Name |
|
| |
|
|
| ||
| IP Address |
|
| |
| Network Mask |
|
| |
| Gateway Address |
|
| |
| DNS Address |
|
|
OKCancel
IP:012.345.678.912 | |
|
|
DHCP Mode
Selects whether DHCP (Dynamic Host Configuration Protocol) server is enabled or not.
Auto: The IP address and subnet mask are automatically assigned.
In this case, confirm the assigned IP address, subnet mask, gateway address, and DNS address in the launcher menu or the Machine Information menu after the LAN connection is completed.
Off: Sets “DHCP Mode” to “Off”. In this case, enter the IP
address, subnet mask, gateway address, and DNS address.
Host Name
Enter the host name.
IP Address
Enter the IP address.
Setup and Registration 2 Chapter
Registering Local Information | 27 |
|
|