Basic Videoconference

Chapter3

 

Videoconference Basic 3 Chapter

This chapter describes how to conduct a videoconference from start to finish after the administrator has completed various registrations and settings for the system.

This chapter describes how to conduct a point-to-point videoconference via a LAN.

For use of a “Memory Stick” or optional equipment, see Chapter 4.

For information on how to conduct a data conference using the optional PCSA-DSM1 Data Solution Module, see chapter 5.

To conduct an encrypted conference via LAN, see Chapter 6.

To conduct a videoconference using SIP, see Chapter 7.

Starting a Conference by Calling a Remote Party

You can start a videoconference with a remote party by dialing. Once you have made a connection to the remote party, you can begin talking just as with a normal phone call and start a videoconference.

For information on making a call in PC (computer display) mode, see “Calling a Remote Party or Receiving a Call at the PC Screen” on page 89.

Turning on the Power

1 Turn on the power of any equipment to be used for the videoconference.

2 Press the (Power) switch on the PCS-TL33.

The indicator of the switch lights up in orange and power to the Video Communication System comes on. When powering on is complete, the indicator lights up in green.

The launcher menu appears on the display and the picture of the local camera is also shown.

48 Starting a Conference by Calling a Remote Party