Starting an Encrypted Videoconference via LAN

You can start an encrypted videoconference by calling a remote party in the same manner as a basic videoconference.

During an encrypted videoconference via LAN, either the

or icon is displayed on the screen.

The icon appears when “Proprietary” is set as the

signal encryption protocol, and appears when it is set to “Standard”.

Note

When no icon is displayed on the screen, transmission and reception data will not be encrypted. Be sure to confirm that an icon is displayed before starting an encrypted videoconference.

When the encrypted videoconference via LAN is disabled

If the following message appears when you call a remote party, an encrypted videoconference via LAN is not available.

Error Messages

Causes

The far-end system in not

The encryption feature is not

compatible with the

compatible with the remote

encryption feature.

system.

 

 

The encryption feature on a

The encryption feature on a

far-end system is disabled.

remote system is turned off,

 

or the encryption protocol

 

settings on the remote

 

system are different from

 

those on the local system.

 

 

The entered password for

The password entered on the

the encryption feature is not

remote system is not the

correct.

same as that on the local

 

system.

 

 

The conference could not

The encryption feature on the

start because the encryption

local system is turned off.

feature at the near-end side

 

was disabled.

 

 

 

Error Messages

Causes

The conference could not

The encryption feature on the

start because the encryption

remote system is turned off.

feature at the far-end side

 

was disabled.

 

 

 

The conference could not

The encryption protocol

start because the signal

settings on the remote

encryption method at the

system are different from

near-end side differed from

those on the local system.

that of the far-end side.

 

 

 

The standard encryption

You are connected to the

videoconference with SIP

remote system via SIP

connection is not available.

connection.

 

 

The remote party rejects

The settings on the remote

answering.

system are different from

 

those on the local system.

 

 

The encryption feature on a

The encryption feature on the

far-end system is enabled.

local system is turned off.

 

 

LAN via Videoconference Encrypted 6 Chapter

Starting an Encrypted Videoconference via LAN 79