Note

“SIP: No-Video” is only enabled when the optional PCSA- SP1 SIP software is installed.

Video Frame

Select the receive video frame rate.

Auto: The frame rate adjusts automatically.

15fps: Receive CIF format video at a maximum rate of 15 frames per second.

30fps: Receive CIF format video at a maximum rate of 30 frames per second.

Audio Mode

Select an audio compression method for reception. Auto: Match the audio mode selected at the far-end

system.

MPEG4 Audio: Use MPEG4 compliant compression.

G.722: Use G.722 compliant compression.

G.729: Use G.729 compliant compression.

G.728: Use G.728 compliant compression.

G.711: Use G.711 compliant compression.

Note

If the far-end videoconferencing system does not support the audio compression method selected at the PCS-TL33, the G.711 method will automatically be used.

LAN Bandwidth

Select the bandwidth to be used for reception. Available settings are 64 kbps, 128 kbps, 256 kbps, 384 kbps, 512 kbps, 768 kbps, 1024 kbps, 1536 kbps, 2048 kbps, and “User Input”.

Input LAN Bandwidth

When “User Input” was selected for “LAN Bandwidth”, enter the bandwidth value here.

Far End Camera Control

Select whether to enable far-end camera control.

On: Normally this setting should be selected, to allow control of the far-end camera.

Off: Disable control of the far-end camera.

H.239 (Presentation)

Select whether to use the H.239 compliant presentation function.

On: Enables use of the H.239 compliant presentation function.

Off: Disables use of the H.239 compliant presentation function.

Page 3/3

Communication

 

3/3

Encryption via LAN

On

Off

Encryption Protocol

Standard

 

Connectivity Prioritization

Connection

 

Encryption Password

 

 

OKCancel

Right-click the mouse to display a help message.

IP:012.345.678.912

 

 

Encryption via LAN

Select whether to use the encryption feature.

On: Use the LAN encryption feature. When “On” is selected, you must set the encryption protocol, connection method, and encryption password.

Off: Do not use the LAN encryption feature.

Encryption Protocol

Select the type of encryption protocol. Standard: Use standard encryption. Proprietary: Use Sony proprietary encryption.

Connectivity Prioritization Select the connectivity method.

Connection: The connection is given priority. For terminals without LAN encryption capability or terminals where “Encryption via LAN” is set to “Off”, conduct a videoconference without encryption.

Encryption: The encryption is given priority. For terminals without LAN encryption capability or terminals where “Encryption via LAN” is set to “Off”, a videoconference cannot be conducted.

Encryption Password

When “Proprietary” has been selected, a password must be set to enable holding a videoconference using LAN encryption.

The password must be 13 - 20 characters long.

Note

When “Proprietary” has been selected, it will not be possible to connect to the following types of terminals: terminals without LAN encryption capability, terminals where “Encryption via LAN” is set to “Off”, terminals where a different password is set.

Setup and Registration 2 Chapter

Registering Local Information

31