Design and specifications are subject to change without notice.
When you turn on the Video Communication System for the first time after installation, the setup wizard appears on the display.
The items configured with the wizard can be changed later using the setup menu.
Configuration items may differ depending on the software.
1 Select the language used for menus and messages from the “Language”
Language: Available settings are English, Finnish, French, German, Italian, Japanese, Korean, Portuguese, Russian, Simplified Chinese, Spanish, Swedish, Thai, and Traditional Chinese.
1/2
Language | English |
NextCancel
2 Click “Next”.
3 Make the following settings for the LAN.
Note
The following examples assume that English has been selected as display language.
|
| 2/2 |
DHCP Mode | Auto | Off |
Host Name |
|
|
IP Address |
|
|
Network Mask |
|
|
Gateway Address |
|
|
DNS Address |
|
|
EndBack
DHCP Mode: Sets the DHCP (Dynamic Host Configuration Protocol).
Auto: Automatically assigns your IP address, subnet mask, gateway address and DNS address.
Off: Deactivates DHCP. In this case you must set your IP address, subnet mask, gateway address and DNS address manually.
Host Name: Enter your host name.
IP Address: Enter your IP address.
Network Mask: Enter your subnet mask.
Gateway Address: Enter your default gateway address.
DNS Address: Enter your DNS (Domain Name System) server address.
Note
When you set “DHCP Mode” to “Auto”, the assigned IP address will be shown in the launcher menu (page 21) and Status & Info menu (page 51).
If you do not know the settings required for your LAN configuration, contact your network administrator.
4 Click “End”.
The settings are saved.
To cancel the setting
Click “Cancel”.
The settings are not saved and the launcher menu appears.
To go back to the previous wizard
Click “Back”.
Preparation and Installation 1 Chapter
Setting Up the System for the First Time — Initial Setup Wizard | 19 |
|
|