Adjusting the Camera

You can adjust the image shot by the local camera that is sent to the remote party to obtain the desired angle and size.

During communication you can also control the camera on the remote site to adjust the image shot by the remote camera.

Camera Control

Preset

Save Load

Zoom

Focus

Far system

Control by Far End

01:25

Videoconference Basic 3 Chapter

Adjusting the Zoom and Camera Angle

The zoom and angle can be adjusted from the Camera Control menu, the camera image during communication, or the launcher screen when communication is not in progress.

Adjusting the display using the Camera Control menu

The remote camera can only be adjusted during communication.

If the focus adjustment buttons appear on the remote camera adjustment screen, you can adjust the focus.

1 On the menu selection screen, click “Camera Control”.

The Camera Control menu appears.

Camera Control

Preset

 

 

Save

Load

 

Backlight Compensation

 

Flicker Removal

 

White Balance

 

Zoom

Auto

 

 

Adjust

Start

 

Brightness Adjust

 

Near system

Auto Adjust

Far system

 

 

 

 

ControlCancelby Far End

01:25

2 Select the camera you want to control (“Near system” or “Far system”).

3 To zoom the image, click the or button under the image.

4 Click the v/V/b/B symbols at the image edges to adjust the camera angle.

5 If you selected to control the remote camera, click the b/B buttons to adjust the focus.

6 Click or the menu bar.

The Camera Control menu closes.

Notes

•When controlling a remote camera, “Far End Camera Control” must be set to “On” in the Communication Mode menu of the local system, and the remote system must be set to receive camera control commands. For details on setting the remote system, refer to the operating instructions for each device.

•You cannot control the remote camera during a session if the remote control format of the remote camera is not H.281. If you cannot control the remote camera, ask the remote party about the remote control format of their camera.

•If the local and remote parties try to control the same camera at the same time, the camera may not operate correctly.

Adjusting the display during communication

1 Right-click on the local or remote image.

Zoom and angle buttons appear on the display.

Note

When the image is from the local camera, a (Backlight compensation) button appears. Each click of this button toggles the backlight compensation function on and off.

58 Adjusting the Camera