Administrator Setup | 2/11 |
Gatekeeper Mode | On |
Gatekeeper Address | 192.100.10.20 |
User Alias | |
User Number | 100 |
OKCancel
IP:192.100.10.10 | |
|
|
The setting has been configured properly if the correct IP address appears in the launcher menu and “Registration Confirmed” appears under “Gatekeeper” in Page 3/4 of the Status & Info menu.
Note
The information that appears in the launcher menu may differ depending on the “Number Display” setting in the Device Setup menu. You can also click the Number Display portion and select the information to display from a list.
To conduct a video conference
Select “IP” for the line interface, enter the user alias or user number set by the remote party in the number entry text box, and dial.
You can set “IP” as the default line interface selection for the launcher menu by setting “Line I/F” to “IP” in the Dial settings of the Communication Mode menu.
For details on the setting, see “Communication Mode Menu” on page 29.
LAN (Connecting Through NAT)
Connection using NAT allows one IP address to be shared by several computers on the same LAN. This section describes how to set up videoconferences conducted in NAT and global IP environments.
Configuration example
192.168.10.1 |
| 210.20.20.1 | ||||||||||||
|
|
|
|
|
|
| Internet |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
| Router |
| Router |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
192.168.10.10 | 210.20.20.2 |
(Global address) |
1 Enter a name in “Host Name” under Page 1/3 of the LAN Setup menu, set the “DHCP Mode” to “Off“, and enter the appropriate values for “IP Address”, “Network Mask”, and “Gateway Address”.
LAN | LAN |
| 1/3 | |
DHCP Mode | Auto | Off | ||
| ||||
SIP | Host Name | VCT1 |
| |
|
| |||
| IP Address | 192.100.10.10 | ||
| Network Mask | 255.255.255.0 | ||
| Gateway Address | 192.100.10.1 |
| |
| DNS Address |
|
| |
OKCancel
IP:192.168.10.10 | |
|
|
2 Set “NAT Mode” to “On” under Page 2/3 of the LAN Setup menu, and enter the appropriate IP address in “WAP IP Address”.
LAN | 2/3 |
LAN |
|
NAT Mode | On |
SIP | 210.10.10.1 |
WAN IP Address | |
Port Number Used | Default |
TCP Port Number |
|
UDP Port Number |
|
OKCancel
IP:192.168.10.10 | |
|
|
3 Remote parties must configure Page 1/3 of the LAN Setup menu in the same way.
Note
If the remote parties are not in a NAT environment, NAT settings in the LAN Setup menu must be configured.
To conduct a video conference
Select “IP” for the line interface, enter the remote party’s IP address in the text box, and dial.
You can set “IP” as the default line interface selection for the launcher menu by setting “Line I/F” to “IP” in the Dial settings of the Communication Mode menu.
For details on the setting, see “Communication Mode Menu” on page 29.
Note
When using the terminal in the NAT environment, you can connect to a remote party (global IP), but for a remote
Setup and Registration 2 Chapter
Setting Up the Network Configurations 45