Setup and Registration 2 Chapter

party to connect to you, you must configure your router settings. For details on router settings, consult with the system administrator.

LAN (Connecting With H.460 Firewall Traversal)

You can use H.460 to traverse firewalls and conduct conferences with terminals on other networks.

Configuration example

192.168.10.1210.20.20.1

Internet

RouterRouter

Traversal server

192.168.10.10

210.20.20.2

(Global address)

1 Set “NAT/Firewall Traversal” to “On (H.460)” under Page 3/3 of the LAN Setup menu.

LAN

LAN

3/3

SIP

NAT/Firewall Traversal

On(H.460)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

OKCancel

Right-click the mouse to display a help message.

IP:012.345.678.912

 

 

Note

You must set up the gatekeeper to use this function.

2 Enter a name in “Host Name” under Page 1/3 of the LAN Setup menu, set the “DHCP Mode” to “Off“, and enter the appropriate values for “IP Address”, “Network Mask”, and “Gateway Address”.

LAN

LAN

 

1/3

DHCP Mode

Auto

Off

 

SIP

Host Name

VCT1

 

 

 

 

IP Address

192.100.10.10

 

Network Mask

255.255.255.0

 

Gateway Address

192.100.10.1

 

 

DNS Address

 

 

OKCancel

Right-click the mouse to display a help message.

IP:192.100.10.10

 

 

3 Set “Gatekeeper Mode” to “On” under Page 2/11 of the Administrator Setup menu, and enter the appropriate values for “Gatekeeper Address”, “User Alias”, and “User Number”.

Administrator Setup

2/11

Gatekeeper Mode

On

Gatekeeper Address

192.100.10.20

User Alias

PCS-A

User Number

100

OKCancel

Right-click the mouse to display a help message.

IP:192.100.10.10

 

 

The setting has been configured properly if the correct IP address appears in the launcher menu and “Registration Confirmed” appears under “Gatekeeper” in Page 3/4 of the Status & Info menu.

Note

The information that appears in the launcher menu may differ depending on the “Number Display” setting in the Device Setup menu. You can also click the Number Display portion and select the information to display from a list.

To conduct a video conference

Select “IP” for the line interface, enter the remote party’s IP address in the text box, and dial.

You can set “IP” as the default line interface selection for the launcher menu by setting “Line I/F” to “IP” in the Dial settings of the Communication Mode menu.

For details on the setting, see “Communication Mode Menu” on page 29.

46 Setting Up the Network Configurations