Web Control Function

Chapter9

 

This chapter introduces the Web Control Function which is used to operate the PCS-TL33 over a LAN. The Web Control Function helps you control the PCS-TL33, or change its setup configuration, using a Web browser installed on your PC, such as Internet Explorer. The following is a set of Operating Instructions for the Web Control Function.

Internet Explorer is a product of the Microsoft Corporation. Please use Version 5.0, or above (Version 6.0 recommended).

Open the Web Page

Enter the IP address assigned to the PCS-TL33 in the address line of your browser.

The format of an address is: http://XXX.XXX.XXX.XXX/

For instance, if the IP address is “192.168.1.24”, enter “http://192.168.1.24/” in the address line.

Notes

When a proxy server in an external network segment has been set, the Gateway address in the PCS-TL33 LAN setting must also be set. Or set your Web browser proxy setting to “No Proxy” for the PCS-TL33.

The window that appears after logging in uses your Web browser’s pop-up function. If you are using your browser’s pop-up blocker function, make sure to disable it.

Function Control Web 9 Chapter

92 Open the Web Page