Calling a Remote Party or Receiving a Call at the PC Screen
Calling a Remote Party While PC Screen Is Shown
While a computer image is shown on the display of the
the 
(Videoconference) button on the unit.
For details on calling a remote party, see “Starting a Conference by Calling a Remote Party” on page 48.
Receiving a Call While PC Screen Is Shown
When a call from a remote party is received, the procedure differs depending on whether Auto Answer or Manual Answer has been selected.
Auto Answer mode
The system automatically receives the call from the remote party and the videoconference begins.
However, screen display settings cannot be changed at the
PC screen. Press the 
(Videoconference) or 
(Menu) button on the unit to switch to the videoconference screen.
Manual mode
When there is an incoming call, a ringer tone sounds. You need to connect the call manually to start the conference, but this procedure is not possible at the PC screen. To begin a conference, obey the message on the screen, press
the 
(Videoconference) button on the main unit, and click “OK”. The display switches to the videoconference screen.
You can also press the 
(Menu) button on the main unit and click “OK” to begin a conference.
Note
When “Videoconference Button Answer” is set to “On” in the Answer Setup menu and you receive a call, you can start the conference by pressing the 
(Videoconference) button on the unit or reject the call by pressing the 
(PC) button.
Adjusting the Picture Quality on the Display
You can adjust the picture quality on the display in the Display Setup menu.
The picture quality setting items differ depending on the picture (main picture) currently on the display: videoconference or picture from a computer. The adjusted values are retained for each of the two picture types, respectively.
1 Press “Display” in the screen to select the menu.
The Display Setup menu appears.
Display Setup (Videoconference)
Quality Mode | Standard |
Picture | 50 |
Brightness | 50 |
Backlight | 70 |
Reset |
|
Wide Mode | Zoom |
IP:012.345.678.912 | |
|
|
2 Make settings for the respective items, and then click
.
Display Setup Menu for
Videoconference
Display Setup (Videoconference)
Quality Mode | Standard |
Picture | 50 |
Brightness | 50 |
Backlight | 70 |
Reset |
|
Wide Mode | Zoom |
IP:012.345.678.912 | |
|
|
Display Computer as Use 8 Chapter
Calling a Remote Party or Receiving a Call at the PC Screen / Adjusting the Picture Quality on the Display | 89 |
|
|