Menus 7 Chapter

Menu items in the 600s, relating to the time code, metadata, and UMID

Item number

Item name

Settings

 

 

 

 

611

TC OUTPUT PHASE IN EE MODE

 

Select the time code output mode for output from the TC OUT connector

 

 

 

in E-E mode.

 

 

 

mutng (muting): Suppress the output.

 

 

 

thru (through): Output the time code input to the TC IN connector as it

 

 

 

is.

 

 

 

v-in (video input phase): Output the time code with the same phase as

 

 

 

the input video signal phase.

 

 

 

v-out (video output phase): Output the time code with the same phase

 

 

 

as the output video signal phase.

 

 

 

 

612

TC OUTPUT MUTING IN SEARCH

 

Select whether to suppress the output from the TC OUT connector in jog/

 

MODE

 

shuttle mode.

 

 

 

on: Suppress.

 

 

 

off: Do not suppress.

 

 

 

 

619

VITC

 

Specify whether or not to record the VITC generated by the internal time

 

 

 

code generator.

 

 

 

off: Do not record internally generated VITC.

 

 

 

on: Record internally generated VITC.

 

 

 

 

 

 

 

Note

 

 

 

 

Even

if this item is set to “off,” VITC is recorded if the input video signal

 

 

 

contains VITC and the VITC line is set to “thru” with item 723.

 

 

 

628

DF MODE

In 525(U)/525(J) line modes, when the INT/EXT/RP188 switch is set to

 

 

 

INT and the PRESET/REGEN switch is set to PRESET, select the frame

 

 

 

mode of the internal time code generator and counter.

 

 

 

df (on (df)): Drop-frame mode

 

 

 

ndf (off (ndf)): Non-drop frame mode

 

 

 

 

629

TC SELECT

 

Select the type of time data to show in the time data display, and the type

 

 

 

of external time code when the INT/EXT/RP188 switch is set to EXT and

 

 

 

the PRESET/REGEN switch is set to REGEN.

 

 

 

vitc: Display time code as VITC, or select VITC as the external time

 

 

 

code.

 

 

 

tc: Display time code as TC, or select TC as the external time code.

 

 

 

See 4-1-2 “Recording Time Code and User Bit Values” (page 44) for

 

 

 

more information about selecting external time code.

 

 

 

 

632

TC UBIT SELECT

 

When item 629 is set to “tc,” specify whether to synchronize the user bits

 

 

 

of the time code generator to the internal clock.

 

 

 

fix: Do not synchronize user bits.

 

 

 

time: Synchronize user bits to the internal clock.

 

 

 

 

633

VITC UBIT SELECT

 

When item 629 is set to “vitc,” specify whether to synchronize the user

 

 

 

bits of the time code generator to the internal clock.

 

 

 

fix: Do not synchronize user bits.

 

 

 

time: Synchronize user bits to the internal clock.

 

 

 

 

634

WATCH AUTO ADJUST

 

When external time code input contains real-time clock user bits, specify

 

 

 

whether to adjust the internal clock to match the real-time clock.

 

 

 

off: Do not adjust the internal clock to match the real-time clock.

 

 

 

on: Adjust the internal clock to match the real-time clock.

 

 

 

651

UMID SDI OUTPUT

Select whether to output UMID in the VANC of the SDI output.

 

 

 

off: Do not output.

 

 

 

on: Output.

 

 

 

See 7-3-3 “Using UMID Data” (page 109) for more information about

 

 

 

UMID.

 

 

 

 

 

102 7-3 Extended Menu