Sony PDW-R1 3-1-6Using the RM-280Editing Controller, Using the RM-280as an editor, Using the RM-280as a remote controller

Connections using the S400 (i.LINK) connector:

Cut editing system comprising this unit as a player and a DSR-	1: 75 Ω coaxial cable (not supplied)
2000/2000P unit as a recorder. For cut editing, the system uses
the editing functions of the recorder. In this system, all signals
	2: Cable with XLR connectors (not supplied) a)
such as the video/audio signals and control signals are
transferred through the S400 (i.LINK) connector.
	3: i.LINK cable (not supplied)

Video monitor

To analog audio input connector

To composite video input connector

2

1
	VIDEO OUT 2
	(SUPER)			AUDIO IN
REMOTE	REF VIDEO IN	DIGITAL AUDIO (AES/EBU)		1/3	2/4
DC OUT 12V	IN 1/2	3/4 OUT	1/2	3/4
VIDEO	SDI		TC	AUDIO OUT		AUDIO
S400 INOUT1	OUT2(SUPER) IN	OUT(SUPER)	IN	1/3	2/4	OUT
				OUT

S400 (i.LINK)

PDW-R1(player)

PDW-R1 (player) settings

Remote control switch (see page 12): REMOTE

Extended menu item 214 “REMOTE INTERFACE”: i.LINK Extended menu item 820 “AUDIO OUTPUT CH1/CH2 SELECT”:

moni

a) Use an XLR/pin converter plug (not supplied) as required.

Video monitor

To composite video input

1connector

3

i.LINK (optional DSBK-190)

DSR-2000/2000P

VIDEO OUT 3 (SUPER) (recorder)

DSR-2000/2000P (recorder) settings

i.LINK button: Lit

SDTI/i.LINK button: i.LINK

For details about the settings of the DSR-2000/2000P, refer to the operating instructions for the unit.

Preparations 3 Chapter

3-1-6 Using the RM-280 Editing Controller

You can connect an RM-280 Editing Controller to this unit and use it as an editor or as a remote controller.

Using the RM-280 as an editor

You can perform assemble and insert editing by connecting this unit, a VTR, and an RM-280 Editing Controller.

When configuring an editing system that includes this unit and another VTR, use this unit as the player (feeder).

For information about connections, refer to the Operation Manual for the RM-280.

RM-280 settings

EDITOR/REMOTE CONTROL switch: EDITOR

Setup menu item 11 “P ST DLY”: LEARN

For settings on the recorder VTR, refer to the Operation Manual for the RM-280.

PDW-R1 settings

Remote control switch (see page 12): REMOTE Extended menu item 214 “REMOTE INTERFACE”:

9PIN

Note

The RM-280 has not memorized the start delay of this unit. Before editing, have the RM-280 memorize the start delay of this unit. (Use the learn function of the RM-280.)

Using the RM-280 as a remote controller

You can connect this unit to the RM-280 with an optional 9-pin remote cable to perform editing operations such as thumbnail search, scene selection, and essence mark

3-1 Connections and Settings 31