Preparations 3 Chapter

71.

For information about how to use the software, refer to the Help provided in the software.

Using the (network) connector (FTP connection)

The following shows an example of an FTP (File Transfer Protocol) connection.

Note

To use PDZ-1 requires the PDW-R1 IP address and other network-related settings to be made beforehand.

For details of the network-related settings, see “To change network settings” (page 115).

Connecting this unit directly to a laptop computer

1: Network cable (not supplied) a)

 

 

 

PDW-R1

 

AUDIO IN

 

 

 

REMOTE

REF VIDEO IN

 

DIGITAL AUDIO (AES/EBU)

1/3

2/4

 

 

 

 

 

DC OUT 12V

 

 

 

IN 1/2

3/4 OUT

1/2

3/4

 

 

 

VIDEO

 

SDI

 

TC

AUDIO OUT

 

 

 

 

 

1/3

2/4

S400

IN

OUT1

OUT2(SUPER)

IN

OUT(SUPER)

IN

OUT

 

(network) connector

1

To network connector

Laptop computer

Make sure the remote control switch (see page 12) is set to “NETWORK” and extended menu item 257 “NETWORK ENABLE” is set to “net.”

a) Use a cross cable.

Connecting three PDW-R1 units to a laptop computer via a LAN.

1: Network cable (not supplied) a)

PDW-R1PDW-R1

(network) connector (network) connector

1

PDW-R1

1

1

LAN

 

(network) connector

 

1

To network connector

Laptop computer

Make sure the remote control switch (see page 12) is set to “NETWORK” on each of the three PDW-R1 units and extended menu item 257 “NETWORK ENABLE” is set to “net.”

a) Use a straight cable.

Using the S400 (i.LINK) connector (FAM connection)

The following shows an example of a FAM (file access mode) connection.

Note

The PDZ-1 Proxy Browsing Software must be installed in advance.

The required FAM driver is also installed when you install the PDZ-1 software.

See 5-4 “Using PDZ-1 Proxy Browsing Software” (page

71)for more information about installing the PDZ-1 software.

Some limitations apply to FAM connections. For details, see 6-2 “File Access Mode File Operations” (page 78).

26 3-1 Connections and Settings