Press the SET button.
Press the SET button.

Menus 7 Chapter

3 Hold down the SHUTTLE button, and turn the jog dial or shuttle dial to set menu item 013 to “on.”

4

5 Hold down the SHUTTLE button, and turn the jog dial or shuttle dial to select the line mode 525(U), 525(J) or 625.

6

7 Turn the unit off (press the on/standby switch to put the unit in the standby state).

Next time the unit is turned on (when the unit is put in the operating state by pressing the on/standby switch), it operates in the new mode.

Menu bank operations (menu items B01 to B13)

This unit allows menu settings to be saved in what are termed “menu banks.” Saved sets of menu settings can be recalled for use as required.

To jump to menu item B01

You can recall any required menu by turning the jog dial or shuttle dial after pressing the MENU button.

If you press the MENU button first, then the COUNTER SEL button, you can jump directly to menu item B01 or H01. The recalled menu item toggles between B01 and H01 every time you press the COUNTER SEL button.

Saving the current active menu settings

Set one of basic menu items B11 “SAVE SETUP BANK- 1” to B13 “SAVE SETUP BANK-3” to “on,” depending on which of the menu banks you wish to save in, then press the SET button.

Recalling settings from a menu bank

Set one of basic menu items B01 “RECALL SETUP BANK-1” to B03 “RECALL SETUP BANK-3” to “on,” depending on which of the menu banks you wish to recall from, then press the SET button.

To recall menu bank 4, select “bank-4” under menu item B20 “RESET SETUP MENU.”

Refer to the maintenance manual for more information about menu bank 4.

 

 

 

Recall

 

Current active

 

 

 

 

 

Menu bank 1

 

 

 

 

 

 

 

 

 

menu settings

 

Save

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Recall

Save

Menu bank 2

 

Recall

 

 

 

Menu bank 3

 

 

Save

 

 

 

 

Recall

Menu bank 4

Save

Note

The following message appears if the line mode of the menu bank that you are about to recall differs from the current line mode.

Display in the video panel and on an external monitor

ITEM-B01

RECALL SETUP BANK-1

System will be changed. Are you sure you want to execute?

EXECUTE : SET KEY

ABORT : MENU KEY

Message in time data display

Press the SET button to recall the settings and switch to the line mode saved in the menu bank. When you power the unit off and then on again, it will use the line mode and settings of the selected bank.

To cancel the recall, press the MENU button.

96 7-2 Basic Setup Menu