To treat the input and output signals of these connectors as non-audio signals, set the maintenance menu item “AUDIO CONFIG”-“NON-AUDIO INPUT” (recording) and extended menu item 823 “NON-AUDIO FLAG PB” (playback).

See 7-3-2 “Extended Menu Operations” (page 108) for more information about how to make extended menu settings.

See 7-4-2 “Maintenance Menu Operations” (page 114) for more information about how to make maintenance menu settings.

2 Analog audio signal inputs/outputs

1 AUDIO IN 1/3, 2/4 connectors

AUDIO IN

1/32/4

AUDIO OUT

1/32/4

2AUDIO OUT 1/3, 2/4 connectors

aAUDIO IN (analog audio signal input) 1/3, 2/4 connectors (XLR 3-pin, female)

These input analog audio signals.

With the AUDIO INPUT SEL button (see page 19), you can select whether the signal input to connector 1/3 is assigned to audio channel 1or 3, and whether the signal input to connector 2/4 is assigned to audio channel 2 or 4. You can set the reference input level with the maintenance menu item “AUDIO CONFIG.” (Factory default setting: +4 dB)

For details of the maintenace menu, see 7-4 “Maintenance Menu” on page 112.

bAUDIO OUT (analog audio signal output) 1/3, 2/4 connectors (XLR 3-pin, male)

These output analog audio signals.

When the unit is shipped from the factory, the 1/3 connector is set to audio channel 1, and the 2/4 connector is set to audio channel 2. You can change these settings with extended menu item 824 “ANALOG LINE OUTPUT SELECT.”

You can set the output level with the maintenance menu item “AUDIO CONFIG.” (Factory default setting: +4 dB) Non-audio signals are muted.

You can also output audio monitor signals by setting extended menu item 820 “AUDIO OUTPUT CH1/CH2 SELECT” to “moni.”

See 7-3-2 “Extended Menu Operations” (page 108) for more information about how to make these settings.

For details of the maintenace menu, see 7-4 “Maintenance Menu” on page 112.

3 Analog video signal inputs/outputs

1 VIDEO IN connector

2 VIDEO OUT 1, OUT 2 (SUPER) connectors

VIDEO

IN

OUT1

OUT2(SUPER)

aVIDEO IN (analog video input) connector (BNC type)

This inputs a composite video signal.

bVIDEO OUT 1, OUT 2 (SUPER) (analog video output 1, output 2 (superimpose)) connector (BNC

type)

These output composite video signals.

The output from the VIDEO OUT 2 (SUPER) connector can have time code, menu settings, alarm messages, and other text information superimposed.

4 SDI signal inputs/outputs

1 SDI IN connector

2 SDI OUT (SUPER) connector

SDI

IN OUT(SUPER)

aSDI IN (SDI signal input) connector (BNC type) This inputs an SDI format video/audio signal.

bSDI OUT (SUPER) (SDI signal output (superimpose)) connector (BNC type)

This outputs an SDI format video/audio signal.

When the unit is shipped from the factory, audio signal output is 8 channels with no switching, and RP188 time code output is set to on. You can change these settings with extended menu item 828 “SDI/DV AUDIO OUTPUT SELECT” and extended menu item 920 “SD-SDI H-ANC CONTROL.”

The output can have time code, menu settings, alarm messages, and other text information superimposed. To turn superimposition off, set the maintenance menu item “OTHERS”-“SDI SUPER” to “OFF.”

To treat the input and output signals of these connectors as non-audio signals, set the maintenance menu item

Parts of Functions and Names 2 Chapter

2-4 Connectors 23