Sony PDW-R1 manual 130

Troubleshooting and Maintenance 8 Chapter

Message in time	Display	Description	Action
data display	condition a)
List Exists	on, limit, off	An attempt was made to edit a clip	Delete all clip lists.
		referenced by sub clips.	See 5-3-2 “Deleting Clip Lists From a Disc”
			(page 69).
Clip End!	on, limit, off	An attempt was made to edit across clip	Editing across multiple clips is not possible.
		boundaries.
Recording	on, limit	More time than normal is required for	Wait until recording finishes.
		recording processing, because
		recording is being done while avoiding
		defects on the disc.
a) With respect to setting of basic menu item 016

Alarms relating to audio and video signals

Message in time	Display	Description	Action
data display	condition a)
REF NON-STD	on, limit, off	A signal other than a standard reference	Input a standard reference video signal to
		video signal was input to the REF	the REF VIDEO IN connector.
		VIDEO IN connector.
No INPUT!	on	An attempt to record was made with no	Input a video signal, and select it.
		input video signal.
VIN NON-STD	on	Recording is being done with a signal	Input a standard video signal to the VIDEO
		other than a standard video signal input	IN connector.
		to the VIDEO IN connector.
EMPHASIS!	on	An unsupported audio emphasis signal	This unit does not support “EMPHASIS
		(“EMPHASIS ON” signal) was input.	ON” audio signals. Input “EMPHASIS OFF”
			signal.
a) With respect to setting of basic menu item 016

Alarms relating to sensors and drives

Message in time	Display	Description	Action
data display	condition a)
HUMID!	on, limit, off	Condensation was detected in the unit.		See 8-2 “Condensation” (page 121).
FAN Stopped	on, limit, off	The motor of the main unit fan has		Contact your Sony service representative.
		stopped.
				Note
DR-FAN Stop	on, limit, off	The motor of a drive fan has stopped.
				The unit will operate, but continued use in
High TEMP!	on, limit, off	Temperatures have risen within the unit.
				this state will result in rising temperatures
				in the unit or drive, with the risk of fire or
High TEMP!	on, limit, off	Temperatures have risen within a drive.
				damage to the unit.
a) With respect to setting of basic menu item 016

130 8-4 Alarms