|
|
When this unit is moved from a cold place to a warmer place, or operated in high humidity, condensation may form on the optical pickup. This is called condensation, and if the unit is operated in this state, it may make correct recording and playback impossible.
Note the following points, to avoid problems with condensation.
•When moving the unit under conditions in which condensation is likely, first insert the disc, and close the lid on the disc slot.
•If when you move the on/standby switch to the ` position the indication “HUMID” appears in the status display, do not insert a disc until the indication disappears.
Error codes appear in the time data display when an error (usually a hardware problem) occurs. Error codes and error messages appear in the video panel, and on an external monitor to which the output of the VIDEO OUT 2 (SUPER)/SDI OUT (SUPER) connector is input.
When an error message appears, follow the instructions in the error message to resolve the problem.
Display in video panel and on external monitor
Error code
ERROR
AN ERROR HAS BEEN
DETECTED. INFORM SERVICE
OF FOLLOWING CODE:
PRESS EJECT KEY
TO EJECT DISC.
Display in time data display
Error code
Troubleshooting and Maintenance 8 Chapter
121 | |
|
|