Parts of Functions and Names 2 Chapter

each clip or sub-clip appear. Press once more to turn the button off, and return to a whole-screen display.

To display the thumbnails of essence mark frames (frames with an essence mark attached), hold down the SHIFT button, and press this button. The essence mark selection menu appears. Select the desired type of essence mark, and the corresponding essence mark frames appear in thumbnails. Press once more, turning the button off, to return to a whole-screen display.

cSHIFT button

Use to switch the functions of various buttons.

dMENU button

Use for setup menu and system menu operations. Pressing this button displays the setting of a setup menu item in the time data display. The same information is also superimposed on the displays of the video panel and a monitor connected to this unit (see page 94). Press once more to return to the original display. The system menu (see page 117) appears in the time data display, in the video panel, and on an external monitor, when you press this button with the SHIFT button held down. Press this button again to escape from the system menu.

eSET button

Use for setup menu settings (see page 94), scene selection (thumbnail search) settings, and so on.

The scene selection window or a menu for sub clip operations appears when you press this button with the SHIFT button held down with either of the following displayed. The window or menu appears in the video panel, and on an external monitor.

When a thumbnail screen is displayed: The scene selection window (see page 62) appears.

When a sub clip thumbnail is displayed: A sub clip operation menu (see page 64) appears.

fRESET button

Press to reset the counter. This is also used to cancel or abandon setup menu settings and scene selection (thumbnail search).

3 Jog/shuttle control block

1 SHUTTLE button

2 Jog/shuttle transport indicators

3 JOG button

SHUTTLE

JOG

5 Shuttle dial

4Jog dial

For details of playback operations with these buttons and dials, see 4-2-2 “Playback Operation” on page 51.

aSHUTTLE button

To play back in shuttle mode using the shuttle dial, press this button, turning it on.

This button switches to shuttle mode whenever it is pressed, even during recording. If you do not want recording to stop with this button, set extended menu item 145 “MODE KEY ENABLE DURING RECORDING” to “stop.”

Pressing the JOG button or turning the jog dial switches to jog mode.

bJog/shuttle transport indicators

These show the playback direction in jog or shuttle speed mode.

b(green): Lights during playback in the reverse direction. B (green): Lights during playback in the forward direction. x (red): Lights during still image display.

cJOG button

To play back in jog mode using the jog dial, press this button, turning it on.

This button switches to jog mode whenever it is pressed, even during recording. If you do not want recording to stop wih this button, set extended menu item 145 “MODE KEY ENABLE DURING RECORDING” to “stop.” Pressing the SHUTTLE button or turning the shuttle dial switches to shuttle mode.

dJog dial

Turn this for playback in jog mode. Turn clockwise for forward direction playback, and counterclockwise for reverse direction playback. In jog mode, the playback

14 2-2 Control Panel